[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Does anyone have any ODB-II software for '99 Solara

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

Does anyone have any ODB-II software for '99 Solara

Does anyone have any ODB-II software for '99 Solara

Postby jbade » Mon Sep 20, 2004 7:32 am

My "check engine" light is on and the "traction off" light. I have an ODB ii cable, but I need some software. Can anyone help?
jbade
Just Licensed SolaraGuy
 
Posts: 4
Joined: Mon Sep 20, 2004 7:01 am
Top

Postby Yanks0114 » Mon Sep 20, 2004 2:44 pm

What kinda cable do you have. I have the scantools.net product and it came with software for free from their website.

Some software is going to be designed for specific hardware.
Yanks0114
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 4756
Joined: Sat Aug 24, 2002 12:01 am
Top

Postby jbade » Mon Sep 20, 2004 4:33 pm

I'm actuallly borrowing a friends cable. He said it was an ODB-II ISO cable. It has a serial (DB-9) connection on one end and ODB-II on the other.
jbade
Just Licensed SolaraGuy
 
Posts: 4
Joined: Mon Sep 20, 2004 7:01 am
Top

Postby JoeB » Mon Sep 20, 2004 4:47 pm

Ask your friend what software he is using / what OBD2 scanner it is. I guess it is possible it is just a cable but highly unlikely. There is at least an interface chip that should be in-line with the cable. It might be in a small box. I have 1 from Car Codes that has a little black box in the cable about 1.5"x2". Then the one that works with Scantool and Digimoto uses the ELM Scanner hardware that is a bigger box (about 3"x5"). The point Yanks was making is the software needs to match the hardware. -JoeB
Please stop by and rate my ride.
http://www.cardomain.com/id/jbailer
Image
JoeB
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1166
Joined: Wed Apr 24, 2002 6:58 pm
Location: Myersville, MD
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 12 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net cron