[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Fuel pump replacement problem

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

Fuel pump replacement problem

Fuel pump replacement problem

Postby Poman » Mon Jul 10, 2006 4:15 pm

After all these years I finally got around to want to replace my fuel pump so I can possibly get rid of the CEL once for all. The 8 screws on the fuel bracket I just can't get them off. I got wd40, PB blaster, even bought Aerokroil (suppose to be the best) and I just keep rounding off the screw heads. It's not I don't have the proper tools. Sometimes the hardest part of upgrading for me is to loosing those damn screws. Anyone who got the fuel pump replaced had any trouble with the screws at all? I think at this point I may have cut the screws and use a flat head instead....not really fond of using a dremel tool around fuel tank... Any thought would be appreciated. TIA.
Poman
Just Licensed SolaraGuy
 
Posts: 38
Joined: Fri Nov 08, 2002 1:53 pm
Location: Orlando, FL
Top

Postby Poman » Mon Jul 10, 2006 8:18 pm

Problem solved...I must be having the over the hill syndrome again. The screws have philip head on it but it's also hexed...doh! Sometimes I figured it out myself by posting questions here... :oops:
Poman
Just Licensed SolaraGuy
 
Posts: 38
Joined: Fri Nov 08, 2002 1:53 pm
Location: Orlando, FL
Top

Postby Jetfixer » Thu Jul 13, 2006 4:42 pm

that would be a Torx bit.
Jetfixer
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 83
Joined: Thu Mar 27, 2003 7:03 am
Location: Pasadena, MD
Top

Postby user99 » Sat Jul 15, 2006 8:15 am

Jetfixer wrote:that would be a Torx bit.


No, mine have a 4-way screwdriver on them.. as well as the octagonal head on them. It was much easier to get those screws out with a socket and a ratchet.
99 Solara SLE V6, Automatic
user99
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 69
Joined: Mon Apr 03, 2006 8:18 am
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 19 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net