high beam problem

by **sahuddleston** » Tue Dec 06, 2005 7:48 pm

my DRL's work fine but when i turn on my high beams only one works? help!

by **Nyyankees3511** » Tue Dec 06, 2005 8:01 pm

Your bulb is a dual filament meaning there are two parts to the bulb the high beam and and low beam part. One of the filaments is blown and you need new bulbs.

by **WTF??** » Tue Dec 06, 2005 8:22 pm

Nyyankees3511 wrote:Your bulb is a dual filament meaning there are two parts to the bulb the high beam and and low beam part. One of the filaments is blown and you need new bulbs.

right on the money!

by **Nyyankees3511** » Tue Dec 06, 2005 8:35 pm

WTF?? wrote:
Nyyankees3511 wrote:Your bulb is a dual filament meaning there are two parts to the bulb the high beam and and low beam part. One of the filaments is blown and you need new bulbs.

right on the money!

HAHA im tryin.

by **sahuddleston** » Tue Dec 06, 2005 10:08 pm

replaced bulb - same problem

Website · by **SpeedSTARs** » Tue Dec 06, 2005 10:56 pm

stupidrunner54 wrote:replaced bulb - same problem

Try cecking the relay box located in front of the battery (Gen1 application). There should be a separate mini fuse for high and low beam left or right side applications. I believe it's a 15amp fuse or 10amp. check those out. Hopefully this helps out. :wink:

by **NeFaRiOuS_SLE** » Fri Dec 09, 2005 1:07 am

Yeah, what he said. Also keep in mind that the DRLs for the Gen1 runs off the low beam (which is kinda stupid considering that Toyota didn't think of how rare the high-beams are used in urban driving and how this shortens the life of the low beam filament)

high beam problem

high beam problem

Who is online