are the 1 gen clear corners the same as 1.5?

by **new guy** » Sun Jan 11, 2004 10:55 pm

i just got a 02 solara and im looking to get clear corners. i looked on ebay and they have 99-01 clear corners, will they fit the 02 solara? and also are ebay's clear corners any good for the solara if not can u recommend any sites. thanks

by **FLASH** » Sun Jan 11, 2004 11:00 pm

No, they won't fit. yes, eBay is the best bet.

by **indiglosolara** » Sun Jan 11, 2004 11:00 pm

no they will not.. i have a 02 and i made the mistake and buying from a 99-01 clear corners and didn't fit..

i didn't realize until i was trying to fit them on...

by **indiglosolara** » Sun Jan 11, 2004 11:00 pm

damn... FLASH was replying at the same time i was....

lolz

by **HKSV6SLE** » Mon Jan 12, 2004 1:35 am

i got my clear corners from matrix racing...pretty cheap

by **new guy** » Mon Jan 12, 2004 6:09 pm

i gave matrix racing a call and they carry 99-01 clear corners only

by **kubi** » Mon Jan 12, 2004 6:21 pm

There are no clear corners for the 02, there is a DIY on how to make them yourself, however I don't know if anyone has actually done that without any problems.

by **new guy** » Mon Jan 12, 2004 6:52 pm

i've been looking i doubt that anyone is going to start either, i think i made a mistake getting the 02 model its so much harder finding parts.

by **Guest** » Mon Jan 12, 2004 7:13 pm

do they make the injen intake for the 2002 6 cyl. ? i cant find it anywhere

by **Jackass-Jeff** » Mon Jan 12, 2004 10:41 pm

the injen is the same for all v6 solaras

the only person do successfully do the 02-3 clear corner DIY was Mark, I believe. But it condenses... the damn reflector is connected in such a stupid way that you'll have chrome chips OR reflector chips after removing the reflector =\

by **kubi** » Mon Jan 12, 2004 11:20 pm

I was thinking about it but I don't know of anyone who has gotten them resealed well enough to prevent the condensation. Charinee did hers, too, and they got water in them.

by **HKSV6SLE** » Tue Jan 13, 2004 3:51 am

a long time ago i found a website that sold clear corners for the 02-03's....and not for the 99-01's....i dont remeber which site it was tho. on the other hand aftermarket corners never fit right, mine fit like crap.

by **indiglosolara** » Tue Jan 13, 2004 11:29 am

HKSV6SLE wrote:a long time ago i found a website that sold clear corners for the 02-03's....and not for the 99-01's....i dont remeber which site it was tho. on the other hand aftermarket corners never fit right, mine fit like crap.

the company prolly made a typo.. they never made any clear corners for the 02-03. So far all the clear corners i have seen are the DIY or Homemade from Oem corners.

by **HKSV6SLE** » Wed Jan 14, 2004 3:05 am

not a typo they showed a picture of it too, cuz the 02-03 corners are slimmer then the 99-01's....i found those while looking for corners for my 99. the site looked basic tho...probably gone now.

by **new guy** » Wed Jan 14, 2004 2:59 pm

i saw a website that looked basic and it advertised 99-02 clear corners, i emailed them and they said it is a mistake, they said they fixed it now...this was like a week ago.

are the 1 gen clear corners the same as 1.5?

are the 1 gen clear corners the same as 1.5?

no luck

Who is online