RX300 block

by **PASolara** » Mon Sep 20, 2004 6:25 am

Hello i am in the prosses of rebuilding a Solara motor. So i was doing some research and noticed that the rx300 has the same 3.0 as us but the Comp ratio is 10.5:1 when ours is like 9.2:1 or something like that. So what i was woundering is if i could just bolt the heads from a camry on there and since it has higher compression and it would give me more power.
sorry if this seems to be a dumb qestion but i have to know :drinking:

by **SC V6** » Mon Sep 20, 2004 6:35 am

I'm not 100% positive, but almost, im sure the heads won't mate up to the block the correct way... and it probably wouldn't seal up.. causeing more and more problems... if I were you I would just modify the heads of the camry... to have higher compression... I wouldn't mix and match, cause most likly it won't match up correctly

by **PASolara** » Mon Sep 20, 2004 6:50 am

Oh ok thanks for your help

by **krawzyazn** » Mon Sep 20, 2004 11:20 am

you can try it if you want and let us know
its like a LS vtec

you know what i mean you never know till you try and look how good the LS vtec's are

RX300 block

RX300 block

Who is online