[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - CEL - EGR Flow Excessive...
Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.

CEL - EGR Flow Excessive...

CEL - EGR Flow Excessive...

Postby Too Bzy » Wed Dec 21, 2005 2:49 pm

My CEL is on and this is the code. I cleared it but it came back in about 300 or so miles. Is there anyone S/C'd that can tell me can you take off the EGR valve without removing the S/C?

Thanks!
Charles "Cee-Jay" Hughes
99 TRD Solara S/C LB GP Ed. 23 of 35
86 Supra w/ 6M-GTE
User avatar
Too Bzy
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 237
Joined: Thu Sep 02, 2004 11:51 am
Location: Greensboro, NC

Postby scdsolara619 » Sat Dec 24, 2005 3:21 pm

I had the MIL come on my car before and ended being a vacuum line not connected after the sc was installed - make sure all vacuum lines are connected. My dealer replaced my EGR valve and the light came back on and then they found a loose vacuum line. Hope this helps!
02 SE V6 (S/C) AT
User avatar
scdsolara619
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 70
Joined: Fri Nov 25, 2005 5:17 pm
Location: 619

Postby NeFaRiOuS_SLE » Sat Dec 24, 2005 10:14 pm

For an N/A, might be that the EGR valve is stuck since it happened to me, but I don't know what's up if it happens with an FI.
NeFaRiOuS_SLE
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3502
Joined: Tue Sep 06, 2005 9:59 am
Location: Diamond Bar, CA

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 4 guests