[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Clutch Pedal Drops to the Floor??

SolaraGuy.com

Drive faster, live longer.
http://solaraguy.com/

Clutch Pedal Drops to the Floor??

http://solaraguy.com/viewtopic.php?f=1&t=51861

Page 2 of 2

Re: Clutch Pedal Drops to the Floor??

PostPosted: Thu Oct 25, 2012 11:31 am
by ronb
And this just happened to mine last night, luckily, on the hills right in front of my house, I managed to hit the peak of the hill and roll it into a parking spot. I started in first and got it to where I could roll it into my garage. I ran to O'Reilly (Kragen) and bought a new slave cylinder that was in stock. I have replaced the slave cyl on my old truck, real PITA to get it lined up right, but eventually I fixed it. I am about to attempt it tonight on the Solara, for those of you who have done it, how difficult was it? Hard to get to? I'm a little worried it will seriously suck. I have big hands lol. Thanks for any tips!

Re: Clutch Pedal Drops to the Floor??

PostPosted: Thu Oct 25, 2012 1:43 pm
by ToyoSolV6
slave is not hard. Master cylinder could get difficult. since you have to bleed it and pump the clutch pedal till you can feel pressure.

Re: Clutch Pedal Drops to the Floor??

PostPosted: Tue Nov 06, 2012 3:29 pm
by sk8r776
Mine did this after I replaced my clutch last month.

Was the master cylinder.

Get ready for an all new feeling for the clutch mine is Uber sensitive now. It takes a little to get used to.
All times are UTC - 8 hours [ DST ]
Page 2 of 2
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/