[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Heater fan won't work except on high
Page 1 of 1

Heater fan won't work except on high

PostPosted: Sun Jan 26, 2014 12:42 pm
by SubjectAlpha
Recently noticed my heater/AC fan doesn't turn on except on the highest setting. Could this be a fuse problem? Is the high fan setting on a separate fuse?

Re: Heater fan won't work except on high

PostPosted: Mon Jan 27, 2014 7:16 am
by ASG14
Likelt the blower motor resistor.

Re: Heater fan won't work except on high

PostPosted: Mon Jan 27, 2014 8:51 am
by SubjectAlpha
Yeah, I think you're right. Saw some videos on where it is and how to replace. Just gotta decide if I'm ambitious enough to try to replace it myself.

Re: Heater fan won't work except on high

PostPosted: Mon Jan 27, 2014 11:53 pm
by ASG14
It's fairly easy, even for a beginer.If you can change a headlight bulb, change an engine air filter, change a battery, change other bulbs, you can do this. It would be just a step above those things.

Re: Heater fan won't work except on high

PostPosted: Wed Apr 09, 2014 12:32 pm
by SubjectAlpha
Update: I did manage to fix it myself. Had to buy a right-angle screwdriver adapter to get that last screw out, and stripped it a little bit in the process. Didn't quite get it all the way screwed back in, but my A/C and heater is working again!