Under dash neon problems
by pythonjosh » Thu Apr 15, 2004 12:36 am
I just got 4 neon tubes today and was going through the directions at http://www.zer0.info/solaraguy/viewtopic.php?t=4655 and the red with white stripe wire isn't connected to the door sensors, the white with silver stripe wire isn't hot (maybe because I don't have a fuse on that line). So I had to get to the door sensor by removing the rear 'oh crap' handle and popping the panel off and the wire to the driver door sensor is red with a green stripe, and the passenger side door is red with a white stripe and silver bars. So what I'm gonna do is just splice a wire to both the wires and connect them to the ground terminal of my switch. And because I have 4 neons to set up I am running 2 wires straight from the battery (1 wire will feed 2 neons) with inline fuses. Then I'm gonna run a constant ground from the under the shifter an put a switch on it. I like the other way better, but the intended variable ground wire isn't it. So I am 100% positive it will work my way. I'll get pics later today and post in the DIY.
Later,
Josh
Later,
Josh
Brilliant Silver 03 Nissan G35 6MT
In the struggle for justice, I is prepared to lay my life on the line. Just like Martin Luther Vandross did.
In the struggle for justice, I is prepared to lay my life on the line. Just like Martin Luther Vandross did.
-
pythonjosh - SolaraGuy Street Racer
- Posts: 1860
- Joined: Mon Sep 01, 2003 5:53 pm
- Location: Torrance, CA