Door jamb plastic

[sunrise_solara]

How could I safely remove the plastic pieces that wrap around the door jamb and lower quarter panel. Mine are turning brown and look very bad on my white car. Should I replace them? I can't see any use for them.

David

[1st Gen Sol]

How could I safely remove the plastic pieces that wrap around the door jamb and lower quarter panel. Mine are turning brown and look very bad on my white car. Should I replace them? I can't see any use for them.

David

Wussup Bro....I just took those pieces off my car it it left a stain on my paint.......but it came off after using a rubbing compound and then giving it a nice wax......There's basically no need for those pieces, it just comes as a protectant from the factory.......I used a heat gun to take mine off and I think that works best.......just don't keep it on the plastic too long or your paint is gonna come off with it....Good Luck Man

[Jai_Jai_Binks]

How could I safely remove the plastic pieces that wrap around the door jamb and lower quarter panel. Mine are turning brown and look very bad on my white car. Should I replace them? I can't see any use for them.

David

Are you referring to the side on the body and not the door right? I remember mine were discolored and i just clay bar'ed them clean..they because white again!

Edit: my stickers were still stuckhard...dirt was on top of the sticker...hence the claybar worked...since your sticker is loose...don't know??

[sunrise_solara]

^Yeah, that's them...Problem is, I think they're coming unstuck (especially the passenger side) and the discoloration is from the dirt trapped underneath. I could be wrong...Hell, I'll try the clay bar and see if it does any good. Thanks

David