Page 1 of 1
Bypass the oem amp..
Posted:
Sun Oct 11, 2009 7:19 am
by GreeKAvaLoN
Ok, so I have a new head unit again, (the pioneer that was originally for sale) and i can only hook up 2 speakers at a time because the radio only has 2 rca jacks in. not 4. I know where my pre-amp is (behind the glove box) and i touched it! lol but what wires are what? I don't want to re-run speakers wires from the doors.
btw, this is a 97 avalon came with premiuim jbl crap
Posted:
Sun Oct 11, 2009 7:39 am
by Taido
You can get RCA splitters if you need more than two outputs.
Posted:
Sun Oct 11, 2009 8:11 am
by GreeKAvaLoN
i did that with one of my older radios and it didn't sound that good. The amp doesn't put out any deep sounds or bass either so i figured i'd just get rid of it.. i'll post a pic of the amp in a bit if anything
Posted:
Sun Oct 11, 2009 4:34 pm
by GreenSolara01
Wy are you using the RCAs? I would just get the harness to go from the radio to the preamp, you should be able to find one for less then $15.
That way you don't have to run wire or deal with spliters
Posted:
Thu Dec 24, 2009 4:58 pm
by mettler
I put a wiring diagram of the factory stereo/Amp up in this thread..hope it helps
http://solaraguy.com/viewtopic.php?t=47752&highlight=