Rear say bar size

[Midias]

Does anybody know the size of the TRD rear sway bar I am in the process of tracking down some non squeaky bushings and I need to know. I think they are 21 mm but can anyone confirm.

[Mole]

19 and 21

[Jon11582]

the bushings that come with it are fine. To get rid of the squeaking, just use lots of lube and plumber's tape and more lube, before you put on the bushing.

[Midias]

the bushings that come with it are fine. To get rid of the squeaking, just use lots of lube and painter's tape and more lube, before you put on the bushing.

I have it well lubed

as for the tape do you mean the blue painters masking tape?

and is it 19 or 21 for the TRD or both on gen 1

[jhenty]

i have the same problem, its gone away with the warm weather for the most part. Side note: which hole is the track setting on the trd sway bar? the one closer or further away?

[CASTRO]

no, not painters tape, you have to get the teflon white plumbers tape. most commonly used for piping

[Jon11582]

no, not painters tape, you have to get the teflon white plumbers tape. most commonly used for piping

Thanks for the correction, I was thinking plumbers tape, but wrote painters tape.
Post updated.

Mine has never squeaked with stock bushings.