Sorry I didn't get back to you earlier. See this e-mail traffic below for info you need.
We purchased from Toyota OE the part requested clearly marked #1236362020 (see attached photo)
However, the O.D. of the larger bush is only 1 15/16" (50.5mm)
(as described by Greg Anderson for a "Manual Transmission")
This part purchased suits our SPF1348K
We expected that it should have the larger O.D. bush at 2 1/2" (63.5mm)
As this is the part number as confirmed by Greg Anderson
It would appear that their must be another factor in this equation.
Can Global or Greg Anderson source the correct arm.
If it can be pressed apart and measured accurately, we can work with that.
Alternately could they send us the correct parts (this obviously will take longer)
Michael Stone
SuperPro Polyurethane
Product Manager & Export Support.
Fulcrum Group of Companies.
Ph : +61 7 3892 9000
Fax: +61 7 3892 1526
Mobile: 0418 787 436
E-mail:
michaels@fulcrumsuspensions.com.au
Web:
www.fulcrumsuspensions.com.au
Web:
www.superpropoly.com
-----Original Message-----
From: Glenn Dirkse [mailto:glennd@globalperformanceparts.com]
Sent: Saturday, 28 May 2005 12:35 AM
To:
michaels@fulcrumsuspensions.com.au
Subject: RE: Contact Us Form
Michael,
We can send you the OE Toyota part. What part number do you want?
Glenn Dirkse
Global Performance Parts
Cell: 616-283-3983
Office: 616-399-9025
Fax: 616-399-9174
Check out our new web site at:
www.globalperformanceparts.com
--------------------------------------------------------------------------------
From: Michael Stone - new [mailto:michaels@fulcrumsuspensions.com.au]
Sent: Wednesday, May 25, 2005 6:45 PM
To:
shidosha01@hotmail.com
Cc: Global Performance Parts - Glenn Dirkse (E-mail)
Subject: FW: Contact Us Form
Hi Rizal Dumadag,
Thank you for the enquiry and visiting our web site.
We don't have the Toyota Solara here in Australia, but we do have Toyota Camry and reports
state they have the same running gear.
We have supplied our part number SPF1348K into the US market, some of the reports coming back
are stating one eye end of the Dog Bone mount in the US spec vehicle is larger than ours.
This was the information sent to the US
This was originally designed for the Wide-bodied Camry - no details if Manual/Automatic 4Cyl, or V6
However, several O.E. numbers are allocated to what we catalogue - 10 in fact#1236174110 4-cylinder Manual, #1236374140 4-cylinder Manual, #1236303080 4-cylinder Manual, ,
#1236303070 4-cylinder Automatic, #1236374130 4-cylinder Automatic, #1236374120 4-cylinder Automatic
#123630A020 V6 Manual, #1236362010 V6 Manual
#1236362020 V6 Automatic,
#1236362030 V6 ???,
Some of these may have be superseded by subsequent numbers.
Please note that these part numbers refer to the complete arm.
So even if the arms vary (in length for instance) they may still
have the same mounting bushes in the ends. So SPF1348K possibly
covers a fair few of these O.E. numbers.
Obviously there is some exceptions to this as Greg Anderson has found.
The only O.E. number I can find for a V6 Automatic is #1236362020
If this can be confirmed, we should be able to source a sample arm here.
If you look at the attached word doc. you can see that two types of arms are available,
I suggest that that our kit fits the arm that has the bushes mounted at 90 degrees to one-another
(Not 100 percent sure)
To finish, we are trying to ascertain what the difference is and are trying to source a Dog bone here in Australia
to the specs coming out of the US, to date with no luck.
Are you able to supply me with some measurements on your arm and vehicle specs?
I await your reply,
Yours Faithfully,
Michael Stone
SuperPro Polyurethane
Product Manager & Export Support.
Fulcrum Group of Companies.
Ph : +61 7 3892 9000
Fax: +61 7 3892 1526
Mobile: 0418 787 436
E-mail:
michaels@fulcrumsuspensions.com.au
Web:
www.fulcrumsuspensions.com.au
Web:
www.superpropoly.com
i20solara02i wrote:from what i understand that v6 auto and v6 5spd had 2 different size.
Ben or Greg do you know if you got the 65mm or the 50mm?
by i20solara02i » Sat Aug 18, 2007 6:15 pm 
