[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - SAFCII
Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.

SAFCII

SAFCII

Postby AT » Sat Oct 25, 2003 11:08 pm

99' Solara SE supercharged 5M

I read the post on installing S-AFC. I just installed SAFCII and am not sure about the Sensor Type setting. I see 2 possible settings MarkII Qualis- HW-13 and the Estima and Alphard both list HW-15 as sensor type.

One member posted Sens No. 12 In and 12 Out.

I currently have it set at HW-13. Can anyone verify if this is correct?

Thanks in advance
AT
 

Postby JoeB » Sun Oct 26, 2003 5:48 pm

AT, The application that most people reference calls for 13 IN/ 13 OUT. One member (? forgot who) took some measurements and came up with 11 IN/ 11 OUT was the best setting. I think you're ok anywhere in the 11-13 range. I have mine set to 13. -JoeB
JoeB
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1166
Joined: Wed Apr 24, 2002 6:58 pm
Location: Myersville, MD

Thanks for reply

Postby AT » Tue Oct 28, 2003 8:15 am

Thanks for the reply
AT
 

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 5 guests