[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - CARBON FIBER GAUGE BEZEL

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

CARBON FIBER GAUGE BEZEL

CARBON FIBER GAUGE BEZEL

Postby jello » Mon Jun 02, 2003 11:03 pm

I got a gauge bezel. How do I get to the gauges. I took out the 2 screws at the top what else do I have to do?
00 solara sle
jello
Just Licensed SolaraGuy
 
Posts: 43
Joined: Sun Mar 16, 2003 1:14 am
Top

Postby Mole » Mon Jun 02, 2003 11:20 pm

use the search... it has been discussd before..
the power of 8
User avatar
Mole
molerator
molerator
 
Posts: 1677884
Joined: Sun Apr 20, 2003 12:25 pm
Location: Glendale, Ca
Top

Postby jello » Mon Jun 02, 2003 11:31 pm

i searched... can you post a link of where it was talked about? Thanks
00 solara sle
jello
Just Licensed SolaraGuy
 
Posts: 43
Joined: Sun Mar 16, 2003 1:14 am
Top

Postby Mole » Mon Jun 02, 2003 11:35 pm

ah nm...

after taking the two screws from the top out, you should be able to bend the plastic cover lining of the cluster. once that is out, there are 4 more screws securing the guage cluster housing. once those are removed there will be some plugs at the top. take those out as they are "idiot-proof," time when you put them back in. you will have to find the correct angle to pull the cluster out. not that hard at all. once the cluster is out and disconnected, slowly pry open the platic cover using a smaller standard screwdriver. pry the whole 360 of the cluster. if you get impatient and rip it off by hand, there is a good chance of cracking the cover. once it is open, then lay on the bezel. reinforce with small amts of double sided stick tape. to put it back in, do steps the steps you did to take it out in reverse.
GL
the power of 8
User avatar
Mole
molerator
molerator
 
Posts: 1677884
Joined: Sun Apr 20, 2003 12:25 pm
Location: Glendale, Ca
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 7 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net