2AZ-FE Headers UPDATE!!!

by **i20solara02i** » Mon Jan 05, 2004 4:01 pm

Jeff and I visited JP Performance today. We have GRRRRRREEEEEEEEEEEEAT news! We can rape the 1MZ =D since they had no room to do a better job (although it's a pretty damn good job) and get higher gains (like on the 1ZZ).

The ridiculous amount of space where our manifold is right now give them the ability to raise HIGH END power AND ALSO LOW END TORQUE! WOoOooOOoOO! Since we have so much extra room, they can do it easier and faster with DYNO PROVEN gains.

He said they would run about $450 for the first people that jump on the deal. A $150 non-refundable deposit is need upfront. The remaining $300 balance will be due upon delivery of the product. The price after the first few will be higher. NOTE: 450 is the ROUGH estimate. If we get more buyers for the first 'wave', the price may be reduced!

10 buyers are needed. So far, we have 3 definate buyers (myself, Mark, and Jeff).

PM me and xravexboix with any questions or concerns.

Website · by **xyntax** » Mon Jan 05, 2004 5:10 pm

I'm on it like Jacko on an 8-yr-old-boy! Count me in. How about some more info to convince more people

by **cruze105** » Mon Jan 05, 2004 5:10 pm

I'm in too.

by **Hsakuragi** » Mon Jan 05, 2004 5:30 pm

rufus129 wrote:We can rape the 1MZ =D since they had no room to do a better job (although it's a pretty damn good job) and get higher gains (like on the 1ZZ).

After me and u had the headers installed, let's see who is raping who while i have time to come down to LA to visit you again ...hahah...lolz... :lol:

(you know i'm kidding all da way..)

by **indiglosolara** » Mon Jan 05, 2004 6:20 pm

hsakuragi wrote:
rufus129 wrote:We can rape the 1MZ =D since they had no room to do a better job (although it's a pretty damn good job) and get higher gains (like on the 1ZZ).

After me and u had the headers installed, let's see who is raping who while i have time to come down to LA to visit you again ...hahah...lolz... (you know i'm kidding all da way..)

Ill about i bring my dad's ghetto MB 190 E with a broken 5th gear and see who wins.. lolz.. j/k....

ok ok back to topic... I would get in on this deal but im longer trying to fix up my solara.. getting ready for a new quad tundra in 6 months or so... but we'll see what happens.

by **Jackass-Jeff** » Mon Jan 05, 2004 6:45 pm

We'll get more peopel in on this when the Scion TC is released for sale (2AZ) if the engine is mounted similarly. Since the engine bay for the 2AZ is so empty, Jose had a HUGE smile =D Big high end HP gain w/o compromising low end torque =D

If all goes well with this, custom turbo here I come =] (this upcoming summer)

by **indiglosolara** » Mon Jan 05, 2004 6:49 pm

x rave xboix wrote:We'll get more peopel in on this when the Scion TC is released for sale (2AZ) if the engine is mounted similarly. Since the engine bay for the 2AZ is so empty, Jose had a HUGE smile =D Big high end HP gain w/o compromising low end torque =D

If all goes well with this, custom turbo here I come =] (this upcoming summer)

Hey jeff for a custom turbo, since we have a auto do you think we will get a good gain from it??? i mean i dont mean to burst any bubbles or anything but i was thinking if its worth it or not for our cars... i would have no doubt doing this if we had a manual...

by **Jackass-Jeff** » Mon Jan 05, 2004 7:35 pm

Step 1: Expensive custom 6 speed =x Hence the summer turbo =P end of summer, that is

by **indiglosolara** » Mon Jan 05, 2004 7:37 pm

x rave xboix wrote:Step 1: Expensive custom 6 speed =x Hence the summer turbo =P end of summer, that is

LOLZ!!!!!!!!

by **lightear** » Mon Jan 05, 2004 9:22 pm

I feel very very iffy about this. .......but um....i'm in since u guys need numbers.

*cross your fingers*

by **Guest** » Mon Jan 05, 2004 10:54 pm

hey thats badass....I'm in but when is the target date for these to be finish...since I am looking at summer for my turbo setup...and yea its automatic, I'm probably going to keep it automatic, look at tony the tiger and his car

I can just imagine the face on the civic i beat....a 4 cylinder automatic camry...lol...anyways enough of that...when and where do I send payments

by **khanhdom** » Mon Jan 05, 2004 10:55 pm

^^^^ that was me...didnt know you can post as a guest...thought i was login

by **Mole** » Mon Jan 05, 2004 11:38 pm

rufus129 wrote: We can rape the 1MZ =D since they had no room to do a better job (although it's a pretty damn good job) and get higher gains (like on the 1ZZ).

PLEEASE re-word that. it sounds like you are saying the 2az will outrun the 1mz.

let alone if all goes well, we'll have a run.

by **Jackass-Jeff** » Tue Jan 06, 2004 1:02 am

Richard = show
I = go...

let's see how it works out haha

by **20SoLaRa02** » Tue Jan 06, 2004 1:42 pm

hey guys i just wanted to get my 2 cents in on this. get ur deposits in asap because i believe jpp will have time in about 2 weeks to begin the project. this place is very busy and the longer you wait he might not have time to get this done for awhile. also he is very well known around these forums and is known to make GREAT HEADERS. this guy is also very nice and easy to deal with. he even installed my tanabe exhaust for free on my car.

also for the guys who are scared to put down money up front. this guy won't make a header that doesn't produce gains. he dyno's everything to make sure it makes the right gains at the right places. also if u guys put money up front and decide when its done u don't want it i'm sure it won't be hard to sell ur spot to someone else.

-michael

2AZ-FE Headers UPDATE!!!

2AZ-FE Headers UPDATE!!!

Re: 2AZ-FE Headers UPDATE!!!

Re: 2AZ-FE Headers UPDATE!!!

Re: 2AZ-FE Headers UPDATE!!!

Who is online