Will Any Shop Tune/Dyno Tune an Safc2??

[rapsux2000]

I can't find a single a place that will tune or dyno tune my SAFC2. The manual was in Japanese, but I got some Japanese shop to install it, but now one can tune it. Are there any places in Southern California that can dyno tune my car with the Safc II? Any help would be appreciated. Thanks guys.

[Flipside909]

Try Dynamic Autosports in South OC.

[SC V6]

I know that all cars are different, and my car might not run the best with someone else's settings.. but could someone send me what there S-afc is set on please... so I have some sort of basis to go off of...
I have a v6, with an intake, greddy exhaust, and a supercharger... with the 6psi pully, auto trani... thanks
if I could get that w\ the 4psi pullyt that would be great too. I know its a long shot.. but... it would help

[kondo]

I can send you my setting but I don't know if they will work right for your car. In some places the settings are really close to the line on the A/F mixture. I had mine tuned with a 5.5 pulley a injen intake, and greddy ehaust. Let me know if you want the setting I can check them on my lunch break. But you could be playing with fire.

Nick

[kondo]

Here are the setting off of my SAFC I am not sure how well they will work with someone elses car. I have SC with 5.5 psi pulley greddy evo and injen intake on a 99 SLE. I currently am running the stock pulley but I dont think it matters since both my knock sensors are blown.

Setting Hi-Thrtl
1000rpm +0%
3000rpm +2%
4000rpm +2%
4500rpm -3%
5000rpm +2%
5500rpm -10%
6000rpm +3%
6500rpm +2%

The Lo-Thrl is flat
Option 3 Th-Poinit is at Lo 10% Hi 50%

Good luck but be carefull again I don't know how well this will work for anyone, these are just the settings on my S-AFC.

Nick