SolaraGuy.com

hey where is the

JP Headers 02-03 4 cyl 2AZ-FE???

krawzyazn wrote:hey where is the

JP Headers 02-03 4 cyl 2AZ-FE???

Probably discontinued and not on JPs website

its still in the news part

I was just gazing around at this thread deciding what mod to do next and I didn't see this site - http://www.trademotion.com/partlocator/index.cfm?action=AccessoryCatalog&siteid=213747&catalogid=3482&categoryid=47903&startrow=1

mentioned, it has some... hard to find TRD goodies.

shocks and strut mounts for the 04+ Gen 2s

shocks:

FR 334386
FL 334387
RR 334388
RL 334389

strut mounts:
need to buy two of each.

F ...SM5423 THESE INCLUDE THE BEARING TOO.
R ...SM5175

o.0

KNOCK SENSOR UPGRADE
http://www.atsracing.net/ats_racing_knock_sensor.htm

"throttle body spacers, how much HP gains are we talkin cause those things cause about 300$ right."

Only works when you wear your tin-foil hat.

panic wrote:"throttle body spacers, how much HP gains are we talkin cause those things cause about 300$ right."

Only works when you wear your tin-foil hat.

They cost between 60 and 80 dollars

Here is a copy and paste my standard PM reply

I get his question a few times a month ie a lot so this is a cut and paste if you have questions feel free to ask and Yes I like it and I think it is worth the cash. You will probably be most interested in redknights thread.

Fisrt off you need one from a toyota tachoma more to come from that. Second you need new screws I will be happy so send you a set of screws and washers for 10 bucks shipped. You should get it from www.hubcapsplus.com for best price about 80 bucks shipped read below.

OK here are some old threads
*************************************************************

Posted: Tue Jun 06, 2006 12:00 pm Post subject:

--------------------------------------------------------------------------------

OK I got it in. The Home Depot did not have 65mm m8X 1.25 bolts just 70 and 60, so in a lapse of good judgment I got 60mm The fit on the top 2 holes no washer. I will be getting 70 mm eventually. 60 mm does NOT fit the bottom 2 holes. I used the 90 mm that came with it and 2 washers each from the kit; I will probably try 70 mm later on. Other than that install was easy.

How did it feel well it is hot out today so I cannot wait for evening to really have fun but I do feel like midrange has had a nice improvement and I would recommend it as a cheap mod for other people. Second gear feels a lot nicer and the powerband feels smoother. I will try to get pictures soon.

****** Update
On the top use m8 X 1.25 70mm long and on the bottom use 2 of the 90 mm long that came with the kit and 2 washers under each 90 and 1 under each 70mm. You will need to also buy 2 m8 washers for the top sense the kit only comes with 4.

*************************************************************



Origional Thread
http://www.solaraguy.org/viewtopic.php? ... e41509aafb


Pictures
http://www.solaraguy.org/viewtopic.php? ... tle+spacer

Redknights report of 20% ariflow increase
http://www.solaraguy.org/viewtopic.php? ... tle+spacer

*************************************************************

http://wheelskin.com/spe-34055.html
Here I found this as the cheapest place, even cheaper than the same company's ebay stuff 79.99 free shipping and enter the coupon code HELIX and get 4 dollars off

Just ordered mine they take paypal yey

I also found a couple a little cheaper on ebay but I wanted the one Greg mentioned.
*************************************************************

Updated with more info for misc performance, Exhaust and ignition

You know what it really does not matter this thread is for an aftermarket parts listing, not to get into a discussion of what ever the hell you want. If really want to talk about the spacer in depth or what ever they hell you are actually doing make a new thread if you want to but unless you have uncovered a new part for the Gen 1 or 1.5 take it else where.

Sorry - I took my cue from the 12 previous posts on the same subject.
You will be sure to caution all the other people, won't you...?

panic wrote:Sorry - I took my cue from the 12 previous posts on the same subject.
You will be sure to caution all the other people, won't you...?

I think you are reading the wrong thread all the previous posts are adding new items or asking me to add new items which is what this thread is for. Except for the fella adding the gen 2 stuff.

And on that note I updated the exhaust section to reflect the JPP 4 cyl headers and the unknown ebay headers.

Midias wrote:And on that note I updated the exhaust section to reflect the JPP 4 cyl headers and the unknown ebay headers.

Did you mean to say 2.2 to reflect the JPP 4 cyl or does it even matter. (Do you mean 2.4 or 2.2 it will fit.)