[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - GReddy eManage for 1MZFEs
Page 1 of 1

GReddy eManage for 1MZFEs

PostPosted: Sun Apr 15, 2012 3:31 pm
by S.Z.-Alpha
I heard that you can tune with GReddy's eManage. How does this work and can you tune N/A as well or is it only for people who wanna boost? There's always changing our injectors right>

Re: GReddy eManage for 1MZFEs

PostPosted: Sun Apr 15, 2012 4:19 pm
by 1gSE
Unless you're boosted, don't waste your money.

Re: GReddy eManage for 1MZFEs

PostPosted: Sun Apr 15, 2012 11:08 pm
by S.Z.-Alpha
Ah...I see. Thanks

Re: GReddy eManage for 1MZFEs

PostPosted: Tue Apr 17, 2012 10:55 pm
by chullen1
I disagree as I am tuning my car on emanage even though I am only doing a full N/A build. I want to be able to have the best tune possible compared to the stock ecu since I am going to be running higher compression. I think it just matters on what you are installing the emanage on. If you are doing on a stock motor it is not needed but if you are building the motor and want to raise rev limit this is a good option.

Re: GReddy eManage for 1MZFEs

PostPosted: Wed Apr 18, 2012 4:08 am
by 1gSE
chullen1 wrote:If you are doing on a stock motor it is not needed


I based my opinion solely off his signature, but I agree with you on a built engine

Re: GReddy eManage for 1MZFEs

PostPosted: Thu May 17, 2012 10:43 pm
by SirThomas88
I wouldn't get the eManage unless you go boost. or go for something cheaper like the AEM FIC.

Re: GReddy eManage for 1MZFEs

PostPosted: Sun Jun 03, 2012 10:00 pm
by chullen1
SirThomas88 wrote:I wouldn't get the eManage unless you go boost. or go for something cheaper like the AEM FIC.

I paid $400 bucks for my emanage ultimate, for that price and it came with a harness and everything. I couldn't say "no".

Re: GReddy eManage for 1MZFEs

PostPosted: Sat Jun 09, 2012 11:04 pm
by SirThomas88
Yea I paid $425 for my eManage Ultimate w/ all the harnesses too, but I still wouldn't have spent that much on tuning software for an n/a car w/ stock engine.

Re: GReddy eManage for 1MZFEs

PostPosted: Mon Jun 11, 2012 8:59 pm
by chullen1
Yeah but the engine gabe and I are building won't be stock so for my purposes it will work just fine

Re: GReddy eManage for 1MZFEs

PostPosted: Tue Jun 12, 2012 12:35 am
by SirThomas88
chullen1 wrote:Yeah but the engine gabe and I are building won't be stock so for my purposes it will work just fine


I was referring to a stock engine that I assume the OP has. I have no doubt it would be a great benefit to the engine ur building.

Re: GReddy eManage for 1MZFEs

PostPosted: Tue Jun 12, 2012 6:50 am
by chullen1
yeah for sure its not needed on a stock motor but when you are adding a lot of different components like I am, I need the best tune possible.