[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Toyosolv6's Build thread
Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.

Toyosolv6's Build thread

Re: Toyosolv6's Build thread

Postby ToyoSolV6 » Tue Nov 13, 2012 6:10 pm

SleeperSolara wrote:Didn't you started a build man....
Will watch this now.
Good luck!!

Yeah its been a slow process but im aiming for it to be done by the end of december. It will be my christmas gift to see her run again.
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Toyosolv6's Build thread

Postby i20solara02i » Tue Nov 13, 2012 8:51 pm

DECEMBER REUNION??
Image
version 3.0 complete 302 hp 303 tq stay tuned for 3.01 (meth installed, now needs to get it tune)
http://www.youtube.com/watch?v=yZOTi2NPNIA
i20solara02i
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1821
Joined: Sun Apr 28, 2002 7:08 pm
Location: so. cali

Re: Toyosolv6's Build thread

Postby SolaraPete » Tue Nov 13, 2012 9:52 pm

Looks like you're off to a good start man :sweet: def subscribed!

You mentioned meth injection. What size nozzle/what kind of setup do you have planned?
'99 S/C'd 5spd: 6psi-KYB/Intrax-Kaminari-Renova- 2.5in w/TRD muffler-full Injen CAI w/crisp-mongo filter-Walbro 190-305cc-Jim's fuel-torque rod-8mm Magnecore-EGR delete-ACT 6-puck-AEM wideband-SAFC2-Supra/ES300 F+R brake conversion
User avatar
SolaraPete
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 266
Joined: Fri Aug 18, 2006 12:36 pm
Location: Illinois

Re: Toyosolv6's Build thread

Postby sliDingSolAra... » Tue Nov 13, 2012 9:57 pm

SolaraPete wrote:Looks like you're off to a good start man :sweet: def subscribed!

You mentioned meth injection. What size nozzle/what kind of setup do you have planned?



I'M CONFUSED.... IT APPEARS YOUR POSTING IN THE FUTURE!!!!! IM ON THE EAST COAST AND ITS 11:56pm, NOV 13
AND YOUR IN ILLINOIS, EXPLAIN!
02 5spd Engine scattered, working on a 3MZ S/C set-up
User avatar
sliDingSolAra...
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 172
Joined: Thu Aug 25, 2011 11:05 pm
Location: New England

Re: Toyosolv6's Build thread

Postby SolaraPete » Tue Nov 13, 2012 10:15 pm

sliDingSolAra... wrote:I'M CONFUSED.... IT APPEARS YOUR POSTING IN THE FUTURE!!!!! IM ON THE EAST COAST AND ITS 11:56pm, NOV 13
AND YOUR IN ILLINOIS, EXPLAIN!



You must have missed my flux capacitor build thread.
:vamp:
'99 S/C'd 5spd: 6psi-KYB/Intrax-Kaminari-Renova- 2.5in w/TRD muffler-full Injen CAI w/crisp-mongo filter-Walbro 190-305cc-Jim's fuel-torque rod-8mm Magnecore-EGR delete-ACT 6-puck-AEM wideband-SAFC2-Supra/ES300 F+R brake conversion
User avatar
SolaraPete
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 266
Joined: Fri Aug 18, 2006 12:36 pm
Location: Illinois

Re: Toyosolv6's Build thread

Postby Mr_Krispy1183 » Tue Nov 13, 2012 11:04 pm

I call shenanigans, your car will be the next "Tracy's car" lol
'01 zenki MCV20 Silverstream Opalescent
Image
User avatar
Mr_Krispy1183
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 1861
Joined: Tue Dec 07, 2004 9:23 am
Location: Los Angeles, CA

Re: Toyosolv6's Build thread

Postby ToyoSolV6 » Wed Nov 14, 2012 12:14 am

i20solara02i wrote:DECEMBER REUNION??

I'm down Richard. Ill get a new thread started to let everyone know.
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Toyosolv6's Build thread

Postby ToyoSolV6 » Wed Nov 14, 2012 12:17 am

SolaraPete wrote:Looks like you're off to a good start man :sweet: def subscribed!

You mentioned meth injection. What size nozzle/what kind of setup do you have planned?

Thanks man! I'm going to be running one 675 ml nozzle and another 325 ml nozzle. Lots meth. But it will be a solid engine. :-)
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Toyosolv6's Build thread

Postby ToyoSolV6 » Wed Nov 14, 2012 12:18 am

Mr_Krispy1183 wrote:I call shenanigans, your car will be the next "Tracy's car" lol

Who's tracy? Lol jk. *sigh* I feel bad for that solara. I wish I could buy that set up.
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Toyosolv6's Build thread

Postby ToyoSolV6 » Wed Nov 14, 2012 9:56 am

Ok so yesterday we got to tearing everything off the engine. I still need to go back tonight to remove the heads. Here are a couple of pics.

Image

Image

My goal was to have the engine at the machine shop today, but we didnt get around to pulling the heads off. So it will have to wait till tomorrow. Either way I think we making progress here. Im anxious to see how the cylinders looks after so much blow by and everything this engine went thru. Ill look at it tonight. :D
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Toyosolv6's Build thread

Postby a94autocamry » Wed Nov 14, 2012 7:08 pm

i20solara02i wrote:DECEMBER REUNION??


Lets doooooo it...I'm down!! :)

Fergi - good job on the progress so far, can't wait to see the finished results :drinking:
Image
slow white = "no show and no go"
a94autocamry
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 161
Joined: Thu Jul 15, 2004 9:43 pm
Location: LA

Re: Toyosolv6's Build thread

Postby ToyoSolV6 » Tue Dec 04, 2012 11:02 am

Ok updates, havent had time to post, but eninge is at the machine shop and has been there for the past two weeks, heads are almost done but my block has become a big issue, apperantly when i popped off the head i found something that was pretty horrific, and this is why anyone who is boosting more than stock boost on the blower or just boosting period HAS TO RUN METH!
I blew a peice of piston off and destroyed my cylinder head, i destroyed my piston(which i really dont care much for the old piston) but the bad part is i put a nice sized dent in my cylinder wall, to the point where its not boreable, here are the pics that i wanted to share.

Image

Image
Tony at the machine shop was telling me that id be better off getting a whole new bare block its not worth re sleeving one cylinder and its also not reliable either..


and these are just pictures of me doing some degreasing to the bay

Image

Image

Image
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Toyosolv6's Build thread

Postby ToyoSolV6 » Tue Dec 04, 2012 11:13 am

.....
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Toyosolv6's Build thread

Postby Smaay » Tue Dec 04, 2012 4:36 pm

hey i have a good 1MZ block bare. it has the crankshaft and new bearings installed in it. ill trade you for your crankshaft and 400 bucks? hows that sound? its been honed and ready for pistons with new rings. i also have all the pistons with brand new rings on them, but they are OEM pistons. im only an hour drive away shoot me a PM
1990 Celica All-Trac 3S-GTE
1997 Celica GT 1MZ/3MZ hybrid
1997 Supra 2JZ-GTE
2001 Celica GT-S 2ZZ-GTE
1998 Dodge Ram Cummins Turbo Diesel

Thats alot of BOOST!!!!
Smaay
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 137
Joined: Thu Mar 14, 2002 5:00 pm
Location: Lancaster, CA

Re: Toyosolv6's Build thread

Postby Brandoe91 » Wed Dec 26, 2012 3:51 pm

Any luck in finding a another block?
TRD S/C 6psi - OBX Full Exhaust - Injen intake ( 226whp untuned).

New Setup - 3mzfe - obx full exhaust - aem fic - innovate mtx-l wideband - Cpe intake. (Estimated 220whp) dyno numbers coming soon.
Brandoe91
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 290
Joined: Sat Sep 25, 2010 10:53 pm
Location: South Florida
PreviousNext

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 10 guests