Re: Toyosolv6's Build thread
Posted: Tue Feb 12, 2013 1:09 pmcant wait for this to be done =D
Page 5 of 9
Posted: Tue Feb 12, 2013 1:09 pmRe: Toyosolv6's Build thread
Posted: Wed Feb 13, 2013 6:13 pm^Thanks bud, its been way overdue for this car to be back on the road. As soon as its out on the road things will slow down a lot for me in modding things, I do plan on an MP90 at about 20psi on nitrous, but i am getting married next year so money has to go to that for now.
Re: Toyosolv6's Build thread
Posted: Thu Feb 14, 2013 8:14 amcongrats! thats definitely more important. good luck with everything.
Re: Toyosolv6's Build thread
Posted: Fri Feb 15, 2013 11:43 amSolarasian wrote:congrats! thats definitely more important. good luck with everything.
Thanks!
Re: Toyosolv6's Build thread
Posted: Sun Feb 17, 2013 5:11 amHopefully by March the car should be back on the road? 
Re: Toyosolv6's Build thread
Posted: Mon Feb 18, 2013 12:01 pmHopefully by Toyotafest 2013!!
Re: Toyosolv6's Build thread
Posted: Mon Feb 18, 2013 12:33 pmGood 1 more month 
Re: Toyosolv6's Build thread
Posted: Tue Feb 19, 2013 11:31 amDSM_Lara wrote:Hopefully by March the car should be back on the road?
Hope fully yes maybe end of march...lol
thenewguy wrote:Hopefully by Toyotafest 2013!!
I really hope so dude. I want it completely done by then.
cartang wrote:Good 1 more month
Im aiming for a month or so. It might take just a bit longer. Since i still have to acquire a crap load of gaskets, and my buddy and i are still port and polishing the heads.
Re: Toyosolv6's Build thread
Posted: Tue Feb 19, 2013 11:44 amUPDATED list
3.0 1MZ-FE bored 0.020 over
Arias 9.0:1 Forged Pistons Ditched this idea
Now going with 9.5:1 Arias Forged Pistons
Polished and balanced crank
Re-adjust rods Also ditched this idea
Eagle 22R Forged Rods w/ ARP Rod bolts
Bearings
Deck the Block
MLS Metal Headgaskets
ARP Head studs
Mill the Heads
3 angle valve job
Port & polished exhaust ports Ditched this idea
Port and polished heads
3.0 1MZ-FE bored 0.020 over
Arias 9.0:1 Forged Pistons Ditched this idea
Now going with 9.5:1 Arias Forged Pistons
Polished and balanced crank
Re-adjust rods Also ditched this idea
Eagle 22R Forged Rods w/ ARP Rod bolts
Bearings
Deck the Block
MLS Metal Headgaskets
ARP Head studs
Mill the Heads
3 angle valve job
Port & polished exhaust ports Ditched this idea
Port and polished heads
Re: Toyosolv6's Build thread
Posted: Wed Feb 20, 2013 11:12 amNice! Looks like your build and mine are expected to be done around the same time. I'm looking at being done by April 1st. Too bad we're on other sides of the continent :p
Re: Toyosolv6's Build thread
Posted: Wed Feb 20, 2013 3:32 pmSirThomas88 wrote:Nice! Looks like your build and mine are expected to be done around the same time. I'm looking at being done by April 1st. Too bad we're on other sides of the continent :p
Lol i know man, only built engines here in so cal, is mine, Frank (jetbtkng), and Tracys (Mr. Chunkz)
Re: Toyosolv6's Build thread
Posted: Wed Feb 20, 2013 6:36 pmTracy, you mean gregtrd's built engine. Soon to have a tvs 1900 supercharger pushing 25 to 30 boost.
Re: Toyosolv6's Build thread
Posted: Thu Feb 21, 2013 5:02 amHow is Tracy Solara?
Re: Toyosolv6's Build thread
Posted: Thu Feb 21, 2013 11:15 amGregtrd wrote:Tracy, you mean gregtrd's built engine. Soon to have a tvs 1900 supercharger pushing 25 to 30 boost.
get the f*ck outta here. Me being 23 yrs old and you being f*cking dinasour years old im still gonna mop you off the street.
Greg im going to put a sticker on my car that say BUILT not BOUGHT
you should put one that says BOUGHT not BUILT
Re: Toyosolv6's Build thread
Posted: Thu Feb 21, 2013 11:17 amDSM_Lara wrote:How is Tracy Solara?
whos tracy lol? lmao jk