Swap help
Alright guys, I'm all done with my swap and I swapped everything out harness wise (even the hood latch with the sensor) and I'm having some trouble starting the car. I had it idling by itself then the next day I splice in my safc and nothing, no start. The starter is cranking and it will turn over a couple times if I pump the gas but she won't run on her own. I have the chip key and have checked if that was the issue but I don't think so, as the security light goes off when trying to start the car. I also have both fuel and spark to the plugs. I have taken the safc back out and rehooked up everything back to stock and still no dice. I keep blowing a 10a fuse for the hazards when trying to use my blinker and I'm wondering if this could point to something? I am about at the end of my skill set and am getting ready to have it towed somewhere, but I figured I would see if any one had any ideas before I do that. Any help is much appreciated.
-
PlateLunch - Regular SolaraGuy Member
- Posts: 210
- Joined: Tue Aug 16, 2011 11:00 pm
- Location: Wa.