[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - SW20 TRD LSD - CLUTCH TYPE
Page 1 of 1

SW20 TRD LSD - CLUTCH TYPE

PostPosted: Wed Nov 26, 2014 3:09 am
by HARKEM
Has anyone fitted a SW20 TRD LSD - Clutch type into a camry E153???

I've just got my hands on one and need some help? am a little confused with some of the post's..

Would you be willing to write a quick guide or "how to" on what you need to do to make it fit in??

Re: SW20 TRD LSD - CLUTCH TYPE

PostPosted: Thu Nov 27, 2014 10:52 am
by Gregtrd
The kaaz Lsd I've installed on my camry and like 5 others are from and mr2. Parts you'll need is 16 final gear bolt, speedo wheel for your speed sensor, speed ring and snap clip, and right and left bearing. Do you have a picture of the Lsd, these are the parts I used when I got brand new lsd. If you have a used on those parts might be on there already.

Re: SW20 TRD LSD - CLUTCH TYPE

PostPosted: Thu Nov 27, 2014 1:29 pm
by HARKEM
Here's the lsd i bought: http://www.ebay.com/itm/361120880220?_t ... EBIDX%3AIT

Do i have to do anything about my axle stubs?
And are these some of the parts?
trd4life wrote:Driven Gear, Speedometer 33481-12100
Ring, Snap 90520-99011
Bolt, Washer Base: 90105-12150 x16 (bolts for drive gear)


If i have the lsd sent to you Greg, would you be willing to set it up for me?
want to put a new set of clutch pads in it as well but i can do that if you want..

Re: SW20 TRD LSD - CLUTCH TYPE

PostPosted: Thu Dec 11, 2014 3:14 pm
by Gregtrd
I was told by Ray from kaaz Usa that lsd should be a straight drop in.

Re: SW20 TRD LSD - CLUTCH TYPE

PostPosted: Sun Jan 11, 2015 6:34 am
by HARKEM
Sweet!!
Thanks Greg!

I get it shipped to me soon so i'll have it in a few months, have a spare M/T so I might practice on that first :)