[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Bypassing the factory amp in the JBL system.
Page 3 of 3

Re: Bypassing the factory amp in the JBL system.

PostPosted: Mon May 14, 2012 9:19 am
by sk8r776
Because you bypassed the amp. If you bought a HU with a low rms, its not going to get loud. im guessing the JBL amp puts out around 30-50 watts. there was no clear markings on them. but stock HUs usually stick in that range.

Re: Bypassing the factory amp in the JBL system.

PostPosted: Sun Apr 03, 2016 7:50 pm
by aznsensation
I know this thread is super old, but I found this youtube video that shows what the OP was talking about. Thanks for help, I feel I can do this on my own and not break anything now. https://www.youtube.com/watch?v=bRIswrodoM8