[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Kazuma TRD Supercharger Install Manual
Page 1 of 1

Kazuma TRD Supercharger Install Manual

PostPosted: Tue Nov 29, 2005 10:32 pm
by SpeedSTARs
Hello Ladies and Gents,

For those that are looking for it, here is the TRD SC manual below. I just found it.

:roll: Hopefully this helps some of you out. :angel:


Supercharger install DOC:

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image


EBC & MISC stuff install DOC:

Image
Image
Image
Image
Image
Image

PostPosted: Wed Nov 30, 2005 10:09 am
by WTF??
hhaha good shyttt G!! :D

PostPosted: Wed Nov 30, 2005 10:23 am
by DatSRBoi
Im having issues with the non and cali specs.. Non Cali ask E7 pin 13 be tapped... But on my car.. E7 pin 13 has nothing in it.. No lines. I dont know if my car was built to cali specs or what? I dont wanna loose power and go with cali specs... And where is the ll2 harness located? Are these all located on the ECU?


Image

Also on this one. I dont get how to tap the E8 pin.. Im so confused with E8, E7, and locations of ll2.... :( . The other 3 lines where easy. Or could it be because thats only camry only and solara runs off the same as cali specs so I tap it with the cali specs chart? but then again on the cali spec chart layout of the pins, E7 pin 13 on theres has a line and mine doesnt still... Im so confused now.

PostPosted: Wed Nov 30, 2005 12:05 pm
by Astro

PostPosted: Wed Nov 30, 2005 12:26 pm
by hskrsolara
dat, where did you get your sc?

PostPosted: Wed Nov 30, 2005 5:56 pm
by bassthrive
wow that scan is so bad it makes my eyes hurt.

PostPosted: Wed Nov 30, 2005 6:14 pm
by SpeedSTARs
:o Man.... :-?

Thank god Astro found the link... Thanks Astro. :wink:

As for the scan, the GIF file came out find in my side of things, But for some reason the pictures are lowsy (now that I've looked back). It must be Photobucket.com translation. :x :oops: :oops:

PostPosted: Wed Nov 30, 2005 11:27 pm
by DatSRBoi
Im still having issues figuring out which wires go where on the manuel solara on non cali specs.. It just doesnt match..

PostPosted: Mon Feb 12, 2007 4:36 pm
by RichD978
anyone have the pdf's saved?

PostPosted: Mon Feb 12, 2007 5:00 pm
by that1mexguy
I only have the Instruction Manual (which I already sent to you) and EBC (if you need it) ... I'm going to start charging you!!! ... and only because it's obvious you've been doing your homework/search I'm willing to help you LOL