SolaraGuy.com

I just unplugged the gray plug on the top left, worked out splendid!

Next is the fogs...

yea that only worked on my car for an hour then they came back on so cutting the wire worked

^ Your right, stoped working, guess the sensor still operates....

Time to cut the wire!

would this work on the camry also?

Yes, it'll work on your Camry. The site I originally posted is down, so here's another (with other cars also).

http://www.lightsout.org/disable.html

cool, thanks.

ok, so where exactly is this plug so i can get to the wires?

be hind the ignition .. you going have to remove the center console and radio trim to get to it

ok, my wire is black in that same location, but i see on here people are saying red with blue line.
i am at number 23 pin which is under the 9

ok, i cut the black wire and nothin... no headlights at all even when turned on.
so its not pin 23

ok, i got it, but mine is not pin 23.. its on the exact opposite side for some reason.. and yes, i was looking at the connector right.. mine is slot 13.. red/blue wire.. who cares.. it works fine now.. now i can hook up my HID

Might seem like a retarded question, but how exactly do i take off the radio and center console to access the wire?

Thanks,
David

At the risk of bumping an old thread... what is the correct way to disable the high beam DRLs on a Gen 1.5?

how does the grey plug look like..theres alot of plugs..