Page 1 of 1
camber kit
Posted:
Sat Sep 29, 2007 11:38 pm
by greeensolara
How to install a camber kit on the rear wheels?
I donno if it makes a difference, but i converted my drums to disks.
it would be great if there were pix available too.
thanks
Posted:
Wed Oct 14, 2009 8:36 pm
by GreenSolara01
UM? Is't this the tutorial?
Search FAIL!
Posted:
Wed Oct 14, 2009 8:42 pm
by Toy1mzfe
remove bolt, insert new bolt and turn bolt to desired angle. done.
Posted:
Wed Oct 14, 2009 8:42 pm
by 99BlackSandv6
Yeah total fail, looks like no tutorial for this.
^^but he's got the right idea.
Posted:
Wed Oct 14, 2009 10:33 pm
by LEE337
Put your DIY requests here:
http://www.solaraguy.com/viewtopic.php?t=9555
That way your not messin up someones search.
Posted:
Wed Oct 14, 2009 11:15 pm
by SleeperSolara
Posted:
Thu Oct 15, 2009 5:27 pm
by GreenSolara01
Whiteline pdf FTMFW! the slip of papper that came with my spc bolts really sucked
Posted:
Thu Oct 15, 2009 6:12 pm
by SleeperSolara
GreenSolara01 wrote:Whiteline pdf FTMFW! the slip of papper that came with my spc bolts really sucked
Yeah i know.
Posted:
Fri Oct 16, 2009 12:22 pm
by GreenSolara01
I’m about to install these SPC camber bolts but I was unsure of a few things. Mine are about an inch and a half longer than stock bolts, and have smaller bolt heads. Stock is 22mm (I think) and camber ones are 19 one side and I think 17 on the other side. Does this seem right to you guys?
I know it is a universal kit applicable to many different cars, and it’s about tensile strength not necessarily an exact OE match. I just wanted to make sure this is the right kit for the gen 1 Solara.
Also I just got my alignment done. What do the numbers for “Cross SAI” and “Included Angle” represent?
Posted:
Fri Oct 16, 2009 12:58 pm
by 99BlackSandv6
Included angle is the angle between the strut and the knuckle.
The relational angle between the two I guess.
SAI is your steering angle inclination.
You can pretty much ignore those measurements, just focus on the three basics: toe, camber and caster.
Posted:
Fri Oct 16, 2009 6:31 pm
by GreenSolara01
Thanks
I found this to post. The link might be helpfull to any one with this kind of thing.
http://www.familycar.com/alignment.htm#Steering Axis Inclination (SAI)
I think I have decided against putting the bolts on. My camber is -1.2 and -1.3 bot in spec so... no reason to tinker iif it an't broke.