How to reverse the polarity(positive/negative) for 9005/9006
Posted: Mon Oct 29, 2007 6:52 pm
Step 1
Find the female connector
for the 9005/9006 wire
harness.
Step 2
Find a pin or needle tool
with a sharp tip.
Step 3
With the sharp tip tool,
gentle push on the lever
that is holding the RED
wire prong.
How to reverse the polarity(positive/negative) for 9005/9006 HID Kit.
lever
Step 4
After gently push on the lever with the sharp tip tool,
simply pull the prong out from the connector. Repeat
Step 2 and Step 3 for the BLACK wire
Step 5
When both Red and Black wires are removed from the
connector, reverse their position and insert the wires
back in to the connector.
After:
Before:
Step 6
Repeat Step 1 to Step 5 for the other wire harness,
and simply follow the installation guide (included in
the kit) to install your 9005/9006 HID kit.
Find the female connector
for the 9005/9006 wire
harness.
Step 2
Find a pin or needle tool
with a sharp tip.
Step 3
With the sharp tip tool,
gentle push on the lever
that is holding the RED
wire prong.
How to reverse the polarity(positive/negative) for 9005/9006 HID Kit.
lever
Step 4
After gently push on the lever with the sharp tip tool,
simply pull the prong out from the connector. Repeat
Step 2 and Step 3 for the BLACK wire
Step 5
When both Red and Black wires are removed from the
connector, reverse their position and insert the wires
back in to the connector.
After:
Before:
Step 6
Repeat Step 1 to Step 5 for the other wire harness,
and simply follow the installation guide (included in
the kit) to install your 9005/9006 HID kit.