[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Anti Fouler Mod to remove P0420
Non-tutorials will be deleted.

Anti Fouler Mod to remove P0420

Anti Fouler Mod to remove P0420

Postby Midias » Wed Jan 21, 2009 7:14 am

here is a mechanical solution using antifouler or anti fouler or antifoulers or antifowler or antifowlers yea I wrote it 5 times I wanted the search engine to pick it up.


You will need a set of Spark Plug Anti-Foul's they are 18mm HELP! brand
Part#42002 or 42009.



Start by drilling out a 1/2" hole in one of the Anti-Foul's
Image

Unbolt your 2nd O2 sensor *NOT THE ONE ON THE HEADER, THE ONE ON THE Y PIPE BEHIND THE CAT*
(I would spray a little PB blaster on this o2 as well before removing)



First coating the threads of all three pieces with anti seize screw on the Anti-Foul with the 1/2" hole on top of the regular one and then screw it into the hole for the 02. The picture below shows only one installed below that is a picture with both installed. Both setups should work about the same. The mod using two will work a little better but I wanted to see if one would work so I tried it and it did. Now screw the 02 into the Anti-Foulers tighten everything up, Then disconnect the (-) Battery terminal for about 1 minute.

Image

Image
User avatar
Midias
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3550
Joined: Sun Jul 18, 2004 8:06 pm
Location: Rochester NY

Postby 1gSE » Wed Jan 21, 2009 8:27 am

i saw this mod on another forum for being an alternative to getting an o2 simulator 8)
Last edited by 1gSE on Wed Jan 21, 2009 11:40 am, edited 1 time in total.
Image
GTO-Vararam/Kooks/Spintech/MGW-P/Tune-12.9 @108
Solara-M62 @ 5.5psi
User avatar
1gSE
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2050
Joined: Wed Apr 11, 2007 8:37 pm
Location: Abilene, TX

Postby Midias » Wed Jan 21, 2009 8:33 am

^ yea it has been around for a bit and I have posted many times about it but I decided it was time for a tutorial.
User avatar
Midias
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3550
Joined: Sun Jul 18, 2004 8:06 pm
Location: Rochester NY

Postby ptballer » Wed Jan 21, 2009 9:00 am

Another nice write up.
Image
Volk_RaysEngineering_SSR_Work_5Zigen_RacingHart__Kosei_Enkei_Toyo_Falken_BFG_Bridgetone_Yokohama
ptballer
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 446
Joined: Fri Feb 11, 2005 9:00 am
Location: New York

Return to Tutorials Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 9 guests