[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - first gen solara window adjustment when replacing motor
Non-tutorials will be deleted.

first gen solara window adjustment when replacing motor

first gen solara window adjustment when replacing motor

Postby Potato » Mon Jan 26, 2009 12:05 pm

not sure if this is posted somewhere else
I did not find the info while searching
but I recently replaced the regulator and had a bit of frustration
everything went simple enough except the window would not line up
I saw some other advice about putting the window up and down first
but one thing that was missing from my Chilton manual
was that there are adjustment service holes

keep the window mount nuts a little loose and put the window all the way up
make sure the door closes without the glass hitting any trim
then you can gently tighten the nuts using these holes
then lower the window and finish tightening them
Image
I bought my manual around the same time as my car, which was when they were first available, not sure if the newer manuals cover this
Potato
Just Licensed SolaraGuy
 
Posts: 7
Joined: Fri Nov 14, 2008 7:23 am

Postby mazen222 » Fri Jan 30, 2009 2:06 pm

good stuff.. i wouldve like to have that when my regulator broke down.

Thanks!
Image
1999, 5 Speed V6
mazen222
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 698
Joined: Thu Jul 19, 2007 5:02 pm
Location: Montreal, QC

Return to Tutorials Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 1 guest