[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Post your DIY Requests Here
Page 2 of 7

PostPosted: Sun Nov 07, 2004 12:14 pm
by rnsmelody
15k, 30k, 60 etc. service guide. i know there is this one, http://www.zer0.info/solaraguy/viewtopi ... c&start=30 but everyone has there own different takes.

PostPosted: Sun Nov 07, 2004 4:16 pm
by greeensolara
Does any one know how to hook the headlights to the alarm so the headlights turn on with the alarm?

PostPosted: Sun Nov 07, 2004 5:40 pm
by krawzyazn
greeensolara wrote:Does any one know how to hook the headlights to the alarm so the headlights turn on with the alarm?
not recommended if you get HID's

PostPosted: Sun Nov 07, 2004 6:16 pm
by greeensolara
i aint gettin HID thnx thou

Rear Drum to Disk Conversion

PostPosted: Wed Dec 01, 2004 12:02 pm
by red171
i look every where for pic (TN ,CM,SG)in this drum to disk brakes.i saw some pic but it don't have not one detail pic there. i have all my parts, but don't know where to start. can someone please post some pic on how to do this.
thanks

another HID question..

PostPosted: Fri Dec 10, 2004 1:27 am
by nj99solara
is it possible to get a HID plug and play kit for a 99 solara? or do you have to modify the headlights? if it is possible which kit is it and what brand name? (temp rating under 5000k,I just want bright white light no colors)any links or pictures would be appreciated

PostPosted: Wed Dec 22, 2004 4:58 am
by swimshady906
Can anyone post a diy on changing the clutch (V6) ?

Gen 2 Tutorial for removing the 2 map light covers?

PostPosted: Thu Jan 20, 2005 4:57 pm
by michaels artic frost
Arthur2k4 wrote:how do u remove that cover.. the two in the front.. not the big one in the middle? that one is easy..but i duno how to do this one


Ask for a tutorial in the tutorial section. :wink:

How bout a Gen 2 member assist Arthur with a tutorial for removing the 2 map light covers?

-M 8)

PostPosted: Mon Jan 31, 2005 4:06 am
by grsd03
can someone make a tutorial on how to tighten struts mounts or struts and how to check if your sway bar is loose? I know alot of us have this problem and think it would be a good addition to the tutorial board.

Thanks

PostPosted: Tue Feb 01, 2005 2:20 pm
by Arthur2k4
can someone hlep e out on how the remove the high mount (third brake light) i want to remove the entire thing to work on it..not just the light bulb
(on gen2)

PostPosted: Wed Feb 02, 2005 7:02 pm
by Qetesh
I'd like to request a DIY on how to take out and replace the stock speaker on the rear deck! Please help! Thanks in advance 8)

PostPosted: Tue Feb 08, 2005 2:15 pm
by Arthur2k4
damn i took a look at the rear speakers today trying to figure out how to remove those and no luck....how the hell do u do it..seems like if u can remove the speakrs u wouldbe able to get to the third brake light above it aswell

PostPosted: Fri Feb 18, 2005 8:32 pm
by Duffman
I know a couple Solaraguys here swapped their stock reverse lights for actual headlights, as blinders - can we get a tutorial on that? I'd only want them for more brightness as I'm backing up, but would be nice to see how it was done.

Also, check the DIY pages for the rear deck removal - basically, you have to take off the handgrips on both sides, the coat hanger piece, pull the bottom panel loose (or take off completely), take the top window panel out (will snap out), and do the same on the other side. Pop the little plastic pop-out pieces out and CAREFULLY slide the deck out (it's flimsy). I think someone did a detailed explanation of it.

PostPosted: Tue Feb 22, 2005 10:36 pm
by dvdchris45
I'd like two tutorials:

1. Am Aux2pod or any other type of auxilary connection from the 04 solara to the ipod mini

2. How to shave the "Solara" emblem without leaving holes and/or patching those holes up.

PostPosted: Thu Feb 24, 2005 12:17 pm
by RichD978
How to install a body kit... Front bumper back bumper sideskirts. I bought a Octane front with evo 2 sideskirt and back last year but dont know what to do with it. no holes in bumpers. clueless