[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Gen 2 Solara SPORT Exterior Service Manual
Stock talk about the Generation 2 and 2.5 Toyota Solara which was released in 2004-2007

Gen 2 Solara SPORT Exterior Service Manual

Gen 2 Solara SPORT Exterior Service Manual

Postby CosmicGrooves » Mon Dec 26, 2011 12:57 pm

There is the Exterior Trim service manual here:
http://www.solaraguy.com/viewtopic.php?f=21&t=35384
But, that doesn't have the SE Sport trim removal/installation information.

I need to replace the rear bumper cover so I thought I see about doing it myself.

Anyone know where I could find that part of the factory service manual?
Image
CosmicGrooves
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 637
Joined: Wed Mar 01, 2006 6:37 pm

Re: Gen 2 Solara SPORT Exterior Service Manual

Postby Black Bob » Wed Dec 28, 2011 2:32 pm

When I had my rear bumper replaced after getting rear ended my bodyshop guy couldn't find anything about proper removal or installation. He wound up snipping off the clips that hold the trim to the old bumper, making a template with the old trim to the new bumper, cutting slots into the brand new bumper and praying that the old Sport trim would line up with the notches in the new bumper. He then attached the old trim onto the new bumper, however because he had cut the clips on the trim he he stuck the broken clips through the bumper slots and epoxied them to stay in place. If that sounds like a bitch, it was! But it worked considering there was zero information found from Toyota. The front fangs were glue stripped and screwed on; I have no clue how the side skirts were mounted.
Current: 2008 Brick Toyota FJ Cruiser 4x4 Upgrade Pkg# 2
Previous: 2005 Arctic Frost Toyota Solara SE Sport V6
User avatar
Black Bob
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 708
Joined: Thu Oct 18, 2007 7:16 am
Location: NE Ohio--where we know nothing about everything and we know it the loudest

Return to Stock Gen 2 and 2.5

Who is online

Users browsing this forum: No registered users and 11 guests