THIS PRODUCT IS A MUST LOOK FOR FORCED INDUCTED CARS

[CASTRO]

^ damn, thanks for all the info. Now things are very clear and what is done and what parts are needed to make everything work. Which wideband is best to get? I read in the past that the AEM is up to the task, but I could be wrong.

[gman]

Castro- I have the LM-1 unit that URDUSA sells on their site. You will need to also purchase a stainless steel bung which is welded into your exhaust prior to the cat and after your afr sensors. This is where the wideband O2 sensor is screwed into. When not in use there is a filler screw that fills the hole. Review the products at the URDUSA site. This mod is just as exciting as going from 4psi to 6psi. It will add smooth power, no flat spots, passes will require less throttle so you don't need to bust into open loop to get good power.

Gerard~

[Vampire]

ESC1 is on it's way. Let you guys know how it goes. Install looks like a snap. I guess I better plug my Innovate unit back in and reinstall the wideband sensor. BTW, I found out the ESC1 unit is preset to activate at 3 psi. Gadget said this is fine and I will try it but I also have an email to Split Second to see if this is adjustable by them. Would be nice to play around with a lower activation point. That is if it makes a difference.

ah thanks for all the info. Im just waiting until you get to try this out and have positive results.