Source for bolts/screws for the TRD Idler assembly/kit
Just in case you need new bolts/screws for your TRD S/C kit, here is an excellent source http://www.mcmaster.com/
For the idler pulleys, I order this part number:
92925A203
(Same as 92925A800)
Metric Blue Coated Flat Head Socket Cap Screw Class 10.9 Alloy Steel, M10 Sz, 60mm L, 1.5mm Pitch, at $6.01 per Pack of 5
For the alternator pivot bolt, it is a special pitch for M10 bolt size. they dont have the Socket Cap screw but the the dirmension is M10 Sz, 100mm L, 1.25mm Pitch.
So I have to order the regular hex head instead;
91180A662
Metric 8.8 Zinc-Pltd Steel Hex Head Cap Screw M10 Size, 100 mm Length, 1.25 mm Special Pitch at $13.54 per Pack of 10
To mount the idler plate assembly to the engine, I bought this bolt;
91180A634
Metric 8.8 Zinc-Pltd Steel Hex Head Cap Screw M10 Size, 30 mm L, 1.25 mm Pitch, Fully Threaded at $7.67 per Pack of 25
For the idler pulleys, I order this part number:
92925A203
(Same as 92925A800)
Metric Blue Coated Flat Head Socket Cap Screw Class 10.9 Alloy Steel, M10 Sz, 60mm L, 1.5mm Pitch, at $6.01 per Pack of 5
For the alternator pivot bolt, it is a special pitch for M10 bolt size. they dont have the Socket Cap screw but the the dirmension is M10 Sz, 100mm L, 1.25mm Pitch.
So I have to order the regular hex head instead;
91180A662
Metric 8.8 Zinc-Pltd Steel Hex Head Cap Screw M10 Size, 100 mm Length, 1.25 mm Special Pitch at $13.54 per Pack of 10
To mount the idler plate assembly to the engine, I bought this bolt;
91180A634
Metric 8.8 Zinc-Pltd Steel Hex Head Cap Screw M10 Size, 30 mm L, 1.25 mm Pitch, Fully Threaded at $7.67 per Pack of 25
- siennasc98
- SolaraGuy Supporter
- Posts: 195
- Joined: Thu Aug 18, 2005 9:15 pm
- Location: 707 - Vallejo, CA