[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - dyno #'s after rebuild 290.7 hp, 273.3 lbft
Page 1 of 2

dyno #'s after rebuild 290.7 hp, 273.3 lbft

PostPosted: Tue Oct 20, 2009 11:18 am
by jetbtkng
i had my 02 lara rebuilt, as i blew it up with 7lbs boost, running it lean, so i had the 4lb pully on for the break in, and had it dynoed tuned, got 248hp, now its got 548 miles, its broke in, so i had greg install my 8 lb pully last nite, going to get it dynoed today, hoping to get 300 hp with an auto, will post #'s when i get back, .............Image....... :drinking:

PostPosted: Tue Oct 20, 2009 11:20 am
by Ruski
nice keep us posted

PostPosted: Tue Oct 20, 2009 11:36 am
by Solarizona
Nice! How's your tranny been holding up? Take some video of the dyno, if you can.

PostPosted: Tue Oct 20, 2009 12:03 pm
by SleeperSolara
Nice man. 8)

PostPosted: Tue Oct 20, 2009 5:25 pm
by jetbtkng
ok the results are in, 290.7 whp 273.3 lbft, and its an auto, vids to follow.................. :drinking:

PostPosted: Tue Oct 20, 2009 5:28 pm
by 1gSE
nice f*ckin numbers!!

PostPosted: Tue Oct 20, 2009 5:33 pm
by ThatVietGuy
BULLSHIIIIT :drinking:

But a video would be nice, though.

PostPosted: Tue Oct 20, 2009 5:57 pm
by 99BlackSandv6
I call BS until I see some proof.
......................................:drinking:

PostPosted: Tue Oct 20, 2009 6:07 pm
by GzNutz
Nice numbers!

PostPosted: Tue Oct 20, 2009 6:15 pm
by jetbtkng
i will be uploading vids in vid section, and everyone here knows if i say thats my #'s, its true.................. :drinking:

PostPosted: Tue Oct 20, 2009 8:03 pm
by 99BlackSandv6
I was just sayin' it was BS because that's what you tell people until they show proof. It'll be cool to see the vids.

PostPosted: Tue Oct 20, 2009 10:06 pm
by RON
Unreal.... BBQ Bob's AT got 270's with 7lbs. so your #s make sense. Nice job. It's not about the motor now....can the drive train handle this?

PostPosted: Tue Oct 20, 2009 10:15 pm
by jetbtkng
well i understand that the tranny can handle 350hp, and the half shafts should be no problem........................ :drinking:

PostPosted: Tue Oct 20, 2009 10:38 pm
by SleeperSolara
jetbtkng wrote:ok the results are in, 290.7 whp 273.3 lbft, and its an auto, vids to follow.................. :drinking:


Very nice numbers man. 8)

PostPosted: Wed Oct 21, 2009 7:09 am
by Eye8Pussies
good numbers!


as for the tranny holding it....it can...but for how long is the question? but nothing a built tranny can't handle since you built the motor now