Boost Gauge info needed

[RON]

I want to install one. Would like to get a gauge that has boost reading MAX @ 20lbs (10 is ideal)...also a POD that would fit a Gen 4 Camry Pillar (prob same a Solara?). Is there a tutorial on install here? Can't find a CURRENT one..just dead links. Basically want fitting sizes for boost port and lines and how/where to run a line through the fire wall.

Thanks

RON

[ASG14]

http://www.sunpro.com/product_detail.php?pid=16358

AutoZone, PepBoys, etc carries it.

[Dawgz]

I want to install one. Would like to get a gauge that has boost reading MAX @ 20lbs (10 is ideal)...also a POD that would fit a Gen 4 Camry Pillar (prob same a Solara?). Is there a tutorial on install here? Can't find a CURRENT one..just dead links. Basically want fitting sizes for boost port and lines and how/where to run a line through the fire wall.

Thanks

RON

This one is pretty dope...

http://cgi.ebay.com/ebaymotors/VZN185-T ... ccessories


goes to 15psi. & 20 vac.

[STYLSH]

I've bought one from them ^^^ and on that ebay listing it also said that it goes to 15psi. But when i got it, I found out that it only goes to 10psi which is perfect for our s/c's.

[Ilovemylara]

I used a sunpro boost gauge. (although im not s/c yet lofl). It was 29.99 at autozone, I also bought that tubing kit linked earlier, because it didnt come with enough to run through the firewall. Once everything was ran through the firewall, i hooked it directly to the throttle body using an adapter i got at a hardware store. Works great, and for now, or at least until im boosted, it helps me measure and control my fuel econmy. Plus it just looks sweet

[Mr_Chunkz]

because i will be going turbo later, i bought an autometer c2 boost gauge. It reads boost up to 30psi...

Regardless, its still quite easy to tell what im boosting cause of the indication marks.

I put it in a glow shift swivel pod, which i will have mine up for sale soon.

[Mole]

HAHA...

ron- are you the dude i got into online argument with years ago about the rotor and cut springs ? (sc3 days)

if you are, good times. hahahahaa

[JamesT]

Get these...

http://cgi.ebay.com/ebaymotors/TRD-JDM-OEM-Boost-gauge-meter-Toyota-Supra-MR2-Tacho_W0QQitemZ200339463218QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item2ea5299c32&_trksid=p4506.c0.m245&_trkparms=65%3A3|39%3A1|240%3A1318

[hskrsolara]

I want to install one. Would like to get a gauge that has boost reading MAX @ 20lbs (10 is ideal)...also a POD that would fit a Gen 4 Camry Pillar (prob same a Solara?). Is there a tutorial on install here? Can't find a CURRENT one..just dead links. Basically want fitting sizes for boost port and lines and how/where to run a line through the fire wall.

Thanks

RON

This one is pretty dope...

http://cgi.ebay.com/ebaymotors/VZN185-T ... ccessories


goes to 15psi. & 20 vac.

same one i have, with super white led's in it. You'll pay a little more, but your needle will do a lot more moving than those big 20 psi gauges.

[TRDSleeper]

Since most of the respondents here have boost gauges, can anybody tell me how they hooked up their gauges? I recently bought one from Glowshift and they included a T adapter to tap into the vacuum lines but I want to use the actual port on top of the TRD S/C. Please let me know the thread size and brass fitting that will fit there. Thanks.

[trd4life]

boost fitting on the s/c is 1/8"npt female

[Dawgz]

The one in my avatar (to the left) is the actual one i have.