[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Question bout Eagle 22R Rods...

SolaraGuy.com

Drive faster, live longer.
http://solaraguy.com/

Question bout Eagle 22R Rods...

http://solaraguy.com/viewtopic.php?f=23&t=50228

Page 1 of 1

Question bout Eagle 22R Rods...

PostPosted: Mon Sep 13, 2010 7:09 pm
by Slut
I got me a set of eagle 22r rods im going to throw in my rebuild.. Im having it milled now so itll fit the crank n pistions.. hopefully the machine shop isnt retarded and does it right.. I told them the specs and even gave an OEM rod for an example.. My question is..,. Am i gonna have a problem fitting the rods in the bore due to them being a little wider? My motor is not bored over.. I guess this question is mainly for you gabe, so please let me know.. I know youve built a few of these motors...will I have enough room to slide the rods down without scoring the walls either heh. Thanks guys

Re: Question bout Eagle 22R Rods...

PostPosted: Thu Sep 23, 2010 8:46 pm
by JavaJoe_2
Have you posted this at TN.

Re: Question bout Eagle 22R Rods...

PostPosted: Wed Jul 18, 2012 8:50 am
by Smaay
was there a update to this? to answer the question, there should be no clearance issues. rod thickness wont affect the bore
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/