[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - supercharger tensioner

SolaraGuy.com

Drive faster, live longer.
http://solaraguy.com/

supercharger tensioner

http://solaraguy.com/viewtopic.php?f=23&t=51512

Page 1 of 1

supercharger tensioner

PostPosted: Fri May 06, 2011 5:54 pm
by 808lara
i have the old kazuma trd supercharger without the tensioner-is it possible to install a tensioner? any advantages or disadvantages?

Re: supercharger tensioner

PostPosted: Fri May 06, 2011 6:20 pm
by Budd81
I was trying to get one for mine also, but was informed that they made 2 different kinds of plate set-ups. Mine is the old set-up, so i just tighten w/ the alternator. I ordered a used Kent-Moore Belt Tension Gauge off Ebay to keep it at the correct tension. From what I was told you would have to get the newer set-up if you want to install the Dynamic Tensioner. Dont know of any pro's or cons with it since I dont have one. From all the post ive been reading over the past few months since ive joined & had my charger installed im pretty certain you will get some info on this & i will be corrected if ive posted any mis-information.

Re: supercharger tensioner

PostPosted: Fri May 06, 2011 9:47 pm
by Gregtrd
The tensioner pulley plate sucks, that pulley plate you have is the way to go.

Re: supercharger tensioner

PostPosted: Fri May 06, 2011 10:35 pm
by trd4life
i sell the updated tensioner style plates. If your interested in a set just shoot me a PM.

thanks

gabe
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/