Getting ready for boost!!!
I was just wondering if I was headed down the right track for boost. I am putting a TRD supercharger on soon, I have already purchased my boost gauge, innovate wideband and 255lph fuel pump. I will be running the stock 4psi, with a Gabe's Fuel mod and spec 3+ clutch and fidanza flywheel, overbored throttle body, JPP performance headers and exhaust (to replace my POS OBX headers that cracked at the welds), magnacore wires and plugs ( unsure of heat range as of yet) and Greddy Emanage Ultimate and Tuned for boost. I bought the car with 50k and have driven it for a few years but ready to step up my game. I currently have 40k in four years and take very good car of my car. I change the oil every 2500 miles. I am going to do this build in three phases.
Phase 1:
Install all parts listed above. Over the winter start to collect parts for spring 3mz/1mz hybrid build. I am going to go low compression for boost. Built tough by Gabe.
I plan on adding 2 row radiator upgrade this winter.
Install supra injectors and 5.5psi pulley and retune Emanage
Install a custom cold air intake with supra MAF
Phase 2:
Install Engine built by Gabe in spring/summer
I will then turn up boost to 7psi and retune. Install poly engine mounts,Install meth injection and retune Emanage.
Phase 3:
Have Gabe build built E153 transmission with LSD
After Phase 3, I might either do a turbo kit added to the supercharger for a twincharged car or try and source one of Gabe's MP90 kits if he still has some around.
I just wanted to see I was going down the right track, I know it might sound like over kill to some I think it will provide a awesome daily driver by the end. I am looking for any other input from everyone.
Phase 1:
Install all parts listed above. Over the winter start to collect parts for spring 3mz/1mz hybrid build. I am going to go low compression for boost. Built tough by Gabe.
I plan on adding 2 row radiator upgrade this winter.
Install supra injectors and 5.5psi pulley and retune Emanage
Install a custom cold air intake with supra MAF
Phase 2:
Install Engine built by Gabe in spring/summer
I will then turn up boost to 7psi and retune. Install poly engine mounts,Install meth injection and retune Emanage.
Phase 3:
Have Gabe build built E153 transmission with LSD
After Phase 3, I might either do a turbo kit added to the supercharger for a twincharged car or try and source one of Gabe's MP90 kits if he still has some around.
I just wanted to see I was going down the right track, I know it might sound like over kill to some I think it will provide a awesome daily driver by the end. I am looking for any other input from everyone.
Last edited by chullen1 on Thu Aug 04, 2011 2:17 pm, edited 2 times in total.
- chullen1
- SolaraGuy Driver
- Posts: 275
- Joined: Mon Jun 30, 2008 4:04 am
- Location: Baltimore