Page 1 of 1
Injector size for 5.5psi
Posted:
Thu Aug 04, 2011 6:56 amby chullen1
I was thinking about doing either supra 2jz-ge injectors or rc engineering 370cc injectors but need to know if the rc engineering injectors need to be peak and hold or saturated, if anyone has a part number that would be great.
Re: Injector size for 5.5psi
Posted:
Thu Aug 04, 2011 1:24 pmby Gregtrd
SL4-370 RC Engineering.
Re: Injector size for 5.5psi
Posted:
Thu Aug 04, 2011 2:15 pmby chullen1
Thanks greg for the info, think I am gonna go with 330cc supra injectors
Re: Injector size for 5.5psi
Posted:
Thu Aug 04, 2011 9:09 pmby up2thedown
all u need is 325/330's injectors, u can run up to 8lbs boost with those.
Re: Injector size for 5.5psi
Posted:
Mon Aug 08, 2011 7:31 amby Gregtrd
^I agree with this newb^, the supra red top 330cc can handle 9psi. Its dyno prove and track drive.
Re: Injector size for 5.5psi
Posted:
Mon Aug 08, 2011 10:51 amby chullen1
how much do the red tops run for because I will still need to send them out to rc engineering for cleaning and rebuilding and probally pro calibration
Re: Injector size for 5.5psi
Posted:
Mon Aug 08, 2011 11:44 amby 1gSE
Re: Injector size for 5.5psi
Posted:
Mon Aug 08, 2011 2:08 pmby chullen1
thanks might pick those up soon, gonna run 4psi for now when I install my supercharger and be at 6psi in a month or two after
Re: Injector size for 5.5psi
Posted:
Mon Aug 08, 2011 2:20 pmby 1gSE
The seller of the set on top also offers to service them