[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - S/C belt size
Page 1 of 1

S/C belt size

PostPosted: Wed Jun 12, 2013 1:39 pm
by ToyoSolV6
Sup everyone.

Question, do any of you know what size belt is required of a 5.5lb pulley? I need to know asap i have to buy a new belt tonight to get everything going on my car i just dont know the size

Re: S/C belt size

PostPosted: Wed Jun 12, 2013 3:09 pm
by 1gSE
I have an 87 inch belt. Dayco 5060870

Re: S/C belt size

PostPosted: Wed Jun 12, 2013 3:11 pm
by ToyoSolV6
1gSE wrote:I have an 87 inch belt. Dayco 5060870

Awesome, and youre at 5.5lbs right? and you think they would have this at any parts store?

Re: S/C belt size

PostPosted: Wed Jun 12, 2013 4:34 pm
by 1gSE
yeah I am. Pretty sure they would. Maybe not a dayco belt but definitely an equivalent

Re: S/C belt size

PostPosted: Wed Jun 12, 2013 5:44 pm
by PlateLunch
Autozone carries dayco belts.

Re: S/C belt size

PostPosted: Wed Jun 12, 2013 9:12 pm
by SolaraPete
FYI I believe the belt size is different if you are running the auto tensioner style vs the older style idler setup.