Page 1 of 2
385whp and 397wtq on trd supercharger
Posted:
Thu Jan 15, 2015 10:48 pm
by Gregtrd
I figured I post here for those that aren't on Facebook
Albertrd trd supercharger solara 385whp 397wtq @15 psi stock block just
Lots of bolt ons.
Re: 385whp and 397wtq on trd supercharger
Posted:
Wed Jan 21, 2015 9:42 pm
by albertrd
Re: 385whp and 397wtq on trd supercharger
Posted:
Fri Jan 23, 2015 7:55 am
by Akfahad
15psi? I thought anything above 7-8psi was counterintuitive (sp?) since it generates too much heat??? Was this done at Church's on the Hub Dyno? Got any details Greg...i.e. what he's using to tune and the other bolt on's? I pretty much have every bolt on you can think of, curious to know what else he's got.
Re: 385whp and 397wtq on trd supercharger
Posted:
Fri Jan 23, 2015 11:03 pm
by Gregtrd
It a whole new ball game when you're pushing 1650ml of water/ meth thru the trd supercharger
After 10 dyno pulls the s/c feels like it just came out of a refrigerator, even the valve covers are cool.
If you want to make these kind of numbers, Then it's all about the setup. 1.9" pulley, you need a
Tight pulley rap (custom pulley plate) 3mz swap. There's numbers are on a set of 330cc supra injectors btw.
The solara set up is a replica of my camry.
Re: 385whp and 397wtq on trd supercharger
Posted:
Fri Jan 23, 2015 11:13 pm
by Gregtrd
Are you auto or manual what's your parts list?
Re: 385whp and 397wtq on trd supercharger
Posted:
Sat Jan 24, 2015 9:12 am
by Toy1mzfe
Saw the vids on instagram. Beastly.
Re: 385whp and 397wtq on trd supercharger
Posted:
Sun Jan 25, 2015 11:14 am
by albertrd
Gregtrd wrote:It a whole new ball game when you're pushing 1650ml of water/ meth thru the trd supercharger
After 10 dyno pulls the s/c feels like it just ca
me out of a refrigerator, even the valve covers are cool.
If you want to make these kind of numbers, Then it's all about the setup. 1.9" pulley, you need a
Tight pulley rap (custom pulley plate) 3mz swap. There's numbers are on a set of 330cc supra injectors btw.
The solara set up is a replica of my camry.
BTW stock internals ladies
Re: 385whp and 397wtq on trd supercharger
Posted:
Mon Jan 26, 2015 5:51 am
by Akfahad
Gregtrd wrote:It a whole new ball game when you're pushing 1650ml of water/ meth thru the trd supercharger
After 10 dyno pulls the s/c feels like it just came out of a refrigerator, even the valve covers are cool.
If you want to make these kind of numbers, Then it's all about the setup. 1.9" pulley, you need a
Tight pulley rap (custom pulley plate) 3mz swap. There's numbers are on a set of 330cc supra injectors btw.
The solara set up is a replica of my camry.
Manual trans. running everything i need to include two, Snow Stage 2 MAF Meth injection, with the nozzle's before and after the throttle body but nothing directly tapped into the SC. I forget the ml of the nozzle's but wanna say a 165 and a 75ml.
Besides the pulley plate that came with the SC, I'm assuming you're talking about something beefier?
Re: 385whp and 397wtq on trd supercharger
Posted:
Mon Jan 26, 2015 8:13 am
by Akfahad
there's the key....3MZ swap. Negative on that one.
Re: 385whp and 397wtq on trd supercharger
Posted:
Mon Jan 26, 2015 1:15 pm
by Gregtrd
1mzfe was running 390wtq and 340whp at 10psi,
15psi on a 1mzfe would do at least 360-370 whp.
Re: 385whp and 397wtq on trd supercharger
Posted:
Mon Jan 26, 2015 1:19 pm
by Gregtrd
You could make the 3mz smog legal by making a egr cooler, I did Toms 3mz s/c auto
pass state smog with flying colors at 12psi.
Re: 385whp and 397wtq on trd supercharger
Posted:
Wed Jan 28, 2015 7:29 am
by Akfahad
taking this to PM Greg.
Re: 385whp and 397wtq on trd supercharger
Posted:
Wed Jan 28, 2015 9:42 pm
by Gregtrd
Pm'ed
Re: 385whp and 397wtq on trd supercharger
Posted:
Tue Mar 03, 2015 12:45 am
by EkiMucH
Hi Greg is Tom in the SG forums? I want to get a hold of him...
Re: 385whp and 397wtq on trd supercharger
Posted:
Tue Mar 03, 2015 1:08 am
by Gregtrd
No, he's on Facebook (Tom Tran)