Finally got my 2.5 tails working.

by **cincybrad** » Thu Nov 05, 2009 9:12 pm

I was nervous about cutting the wires but I finally said forget it, just do it. My main question is for those who have done it, where did you put your converter/adapter? I don't know whether to zip tie the excess and double stick tape it somewhere. I appreciate your ideas/help.

Thanks
Brad

I will get pictures up sometime tomorrow!!

by **kingkakyle** » Thu Nov 05, 2009 11:05 pm

i just tied the cables neatly and dumped it between the lining and the body lol
the resistor i taped to body

by **[SMAN]** » Thu Nov 05, 2009 11:08 pm

kingkakyle wrote:i just tied the cables neatly and dumped it between the lining and the body lol
the resistor i taped to body

x2

by **cincybrad** » Mon Nov 09, 2009 5:14 pm

I have a quick question, I searched but didn't find anything. My new taillights work fine, but today I noticed that when I hit my key fob to unlock/lock doors the taillights/front blinker doesn't flash. Anyone have any ideas?

Thanks
Brad

by **indy04** » Mon Nov 09, 2009 5:16 pm

pics?

by **cincybrad** » Tue Nov 10, 2009 7:38 pm

Here are a cpl of pictures. As well as my new shift knob!

by **Ruski** » Tue Nov 10, 2009 8:28 pm

i need to wire up my reverse lights up, do you have picture of the wires and what parts you used

by **kingkakyle** » Wed Nov 11, 2009 2:31 am

Ruski wrote:i need to wire up my reverse lights up, do you have picture of the wires and what parts you used

check the tutorial was perfect help

by **cincybrad** » Wed Nov 11, 2009 5:24 am

Yeah I just followed the tutorial. The only thing that I did different was instead of pulling the reverse wire and switching with the signal wire, I just connected the reverse wire to the wire I was supposed to swap it with. After I got over cutting the wires it was fairly straight forward.

by **GzNutz** » Wed Nov 11, 2009 5:32 am

Those new tails are looking very nice!

by **Ruski** » Wed Nov 11, 2009 5:32 am

Yea I know about the tutorial its just not clear info for me to start cutting wires

by **cincybrad** » Wed Nov 11, 2009 3:24 pm

PM me Ruski I re wrote the connections to dumb it down for me so it might work for you! Yeah, I really like the tails, but no one has asked about the shifter. It is from a 2010 Camry Sport, it is a little bulkier than the stock and obviously is wrapped leather and feels so much nicer than the stock crappy one.

by **firstSolara** » Thu Dec 10, 2009 12:50 pm

Are those aftermarket? They're sweet!

by **Ruski** » Thu Dec 10, 2009 12:51 pm

^^ they r gen 2.5 tail lights

by **---CAMRAZY---** » Thu Dec 10, 2009 4:39 pm

Don't zip tie the converter it gets hot..... just dump it down the side...

Post up your new updated DIY install on the original thread...

Finally got my 2.5 tails working.

Finally got my 2.5 tails working.

Who is online