Posted: Tue Mar 23, 2010 8:34 pmIf you used fiberglass to do that front lip it's not going to last. ABS and Urethane should be bonded with a urethane fusor. Once fused you can add filler but only a very small amount should be used. Temperature fluctuation will do bad things, not to mention it's the most vulnerable body panel on your car. Any bottoming out and you're going to need to repair and repaint the whole bumper. also the passenger side fang looks more rounded off and not as sharp as the contours on the driver side fang. Props on being unique and trying something new. Why didn't you patch the holes from the front plate? Are you putting one back on eventually?