Page 2 of 2
Re: LED fog light
Posted:
Mon Aug 30, 2010 6:47 pm
by jong2be
Re: LED fog light
Posted:
Mon Aug 30, 2010 10:09 pm
by kpxboi0619
Re: LED fog light
Posted:
Mon Nov 08, 2010 12:23 pm
by dchino
Did you get the xenon whites or ultra blue?
Re: LED fog light
Posted:
Mon Nov 08, 2010 12:26 pm
by kpxboi0619
xenon white
Re: LED fog light
Posted:
Mon Nov 08, 2010 12:32 pm
by dchino
Thanks! Great upgrade for you both. I really wish they made an aftermarket halo light kit like they make for on the camry's. I think that would really complete the solara look.
Re: LED fog light
Posted:
Wed Nov 17, 2010 1:10 pm
by HomeboyMI
I got some led lights and would like to hook them up. Would someone please tell or show me where exactly you wired them for the power source? Can it be done in the fuse box under the hood? If so, which fuse did you use? Thank you.
Also, where do you get the "Toyota" lettering on the brake calipers? Looks cool.
Re: LED fog light
Posted:
Wed Nov 17, 2010 4:02 pm
by DSM_Lara
Mines are tap to my parking lights. So they signal also.
Re: LED fog light
Posted:
Thu Nov 18, 2010 7:23 pm
by HomeboyMI
Hooking them up so they blink is a good idea although I want mine on with the daylight driving lights. I just thought I could hook the hot into the fuse box and avoid splicing wires.
Thanks anyway for your reply DSM Aloha oe
Audi A4 lights
Posted:
Tue Dec 21, 2010 2:32 pm
by HomeboyMI
I bought a Bussmann ATM fuse Add-A-Circuit at Autozone. Inserted it in the IGN2 fuse in the box located under the hood. Drilled a small hole for the wire to come out of the fuse box and hooked my hot wire to it. Works fine and a lot easer than splicing into wires for headlights etc. I get power only when key is turned to the "run" position (switched on).
Re: Audi A4 lights
Posted:
Mon Dec 27, 2010 5:17 pm
by wkbrdr91
HomeboyMI wrote:I bought a Bussmann ATM fuse Add-A-Circuit at Autozone. Inserted it in the IGN2 fuse in the box located under the hood. Drilled a small hole for the wire to come out of the fuse box and hooked my hot wire to it. Works fine and a lot easer than splicing into wires for headlights etc. I get power only when key is turned to the "run" position (switched on).
I am going to do exactly that for mine... whats the difference between IGN1 and IGN2?
Also, I am going to put them on the fogs as well (like the OP), will all of these be able to go into the same power source?
Here's my lights:
Re: LED fog light
Posted:
Mon Dec 27, 2010 7:15 pm
by HomeboyMI
I put mine on a 10amp fuse because these led lights use very little power. IGN2 is your key position when your engine is running. IGN1 is the first position after off, usually used when listening to the radio while necking with your girl and the engine not running.
I really like the looks of these lights. Anything to help the drunks see you coming down the street! The more lights the better.
As far as fog lights go, the engine needs to be running whenever you use your fog lights or you will run your battery down. So with my engine running I can turn on my driving lights and fog lights and all will be working.. Lots of lights!
Good luck.
Gary