[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Headlight Armor Tints for Gen2 Headlight/Fogs

SolaraGuy.com

Drive faster, live longer.
http://solaraguy.com/

Headlight Armor Tints for Gen2 Headlight/Fogs

http://solaraguy.com/viewtopic.php?f=27&t=50465

Page 1 of 1

Headlight Armor Tints for Gen2 Headlight/Fogs

PostPosted: Tue Oct 26, 2010 5:19 pm
by yaddadaimsayin
http://www.headlightarmor.com/04-06-toyota-solara-headlight-protection-kit.aspx

Has anyone had experience with these? I figure they're easier/cheaper than doing the whole black housing but I want to go for the all black look. Any input is appreciated.

Re: Headlight Armor Tints for Gen2 Headlight/Fogs

PostPosted: Wed Oct 27, 2010 12:34 am
by Aotoyota
ive looked into them, and no one can answer, how do you remove them if
they start to fog up like the oem ones...

that would be my only concern,

Re: Headlight Armor Tints for Gen2 Headlight/Fogs

PostPosted: Wed Oct 27, 2010 4:57 am
by 1gSE
Dam no love for the gen 1/1.5?? :bad-words:

Aotoyota wrote:ive looked into them, and no one can answer, how do you remove them if
they start to fog up like the oem ones...

that would be my only concern,


In the FAQ

Are they removable?
Yes they are fully removable but they can only be used once. Removal is straight forward. Start by warming the material a bit with a hairdryer and then pick at a corner with your fingers and then slowly peel off - making sure to hold onto the light firmly during the process.You may or may not have left over adhesive on the lens. Leftover adhesive can be rubbed off or carefully removed with an adhesive cleaner.

Re: Headlight Armor Tints for Gen2 Headlight/Fogs

PostPosted: Wed Oct 27, 2010 4:09 pm
by yaddadaimsayin
yeah bummer they don't have the tails though, and they don't have a combo price either.
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/