Re: Rough idle then stall...please help
After quite some time of just living with the idle dropping off on deceleration, emissions testing came due. I tried multiple ailments with no cure so I came back to this thread.
I heeded the highlighted advice above and changed the URD MAF-SC adjustments back to 10 (no signal modification) and re-flashed the ecu. Low and behold the funky idle is gone and no more CELs!!! Thank you for the suggestion. I wish I had done this over a year ago.
Gregtrd wrote:Here's you answer remove the cpe piggy back and install stock intake box, I'm pretty sure that'll fix your problem, thank me later:) those cpe piggy back sometimes go bad, you might have to sent to cpe to get repaired. Was the cpe solder or did you use crimped connectors? I've worked on a sg members camry having issues with the cpe piggy back.
I heeded the highlighted advice above and changed the URD MAF-SC adjustments back to 10 (no signal modification) and re-flashed the ecu. Low and behold the funky idle is gone and no more CELs!!! Thank you for the suggestion. I wish I had done this over a year ago.
-
GzNutz - SolaraGuy Semi-Pro Racer
- Posts: 2354
- Joined: Mon Oct 22, 2007 7:36 pm
- Location: Land of Beer