GB: CP-E MAFci System -- short ram intake w/ fuel management
by RPM » Thu Feb 16, 2006 5:10 pm
Greetings everyone! I'm sure some of you have seen us around a bit. We're new the the Solara scene, but we're trying to bring you guys some good deals on some high quality products. And that brings us to this group buy...
Looking around the forums, I've found several threads about the CP-E product. One of the most informative threads is this one:
http://www.solaraguy.org/viewtopic.php?t=21689
I'd recommend checking it out. I'll also do a quick summary of the product here as well.
The CP-E MAFci system is not just another intake. It's an intake packaged with a fuel management controller that is pre-tuned for your vehicle. What this means is that you not only get the advantages of a huge 3.5" intake pipe without triggering any CELs, but you also get the advantages of a properly tuned vehicle. Creating a similar setup on your own would be entirely possible, but finding someone to install and tune your fuel management system properly on a dyno could take some effort, and by the time you bought all of the parts and paid for the tuning, you could easily spend twice as much money. This product was purposely designed to be installed by you, in your garage in about an hour and a half to two hours. And when you're done, you get the power instantly. No more tweaking or tuning needs to be done.
So, the question is... If you could spend less than $500 and then with only 1.5 to 2 hours of installation time gain an average of 14.7 wheel hp and 15.4 wheel ft lbs (with peak gains of 17.5 wheel hp and 20.1 wheel ft lbs), would you do it? Well, it's time to find out...
MSRP: $489 + $8 shipping = $497
theRPMstore's price: $469.95 + FREE shipping
GROUP BUY PRICING
This group buy will run from February 16, 2006 through March 3, 2006.
5+ units (including Gen 2 units): $459.95 + FREE shipping
10+ units (including Gen 2 units): $449.95 + FREE shipping
5+ units (Gen 1 and Gen 1.5 only): $449.95 + FREE shipping
10+ units (Gen 1 and Gen 1.5 only): $429.95 + FREE shipping
I hope that is clear. The Gen 2 unit is completely different, so it can't be included for the large discounts. However, I did want to provide some benefit to you guys for the Gen 2 orders. Essentially, you'll get the greatest discount for purchases of the Gen 1 and Gen 1.5 systems, but if the Gen 2 guys buy a lot, you could benefit from that as well.
HOW TO ORDER
Use one of these links, depending on which generation vehicle you have:
Order CP-E MAFci for Gen 1 Solara
Order CP-E MAFci for Gen 1.5 Solara
When you check out, use the coupon code CPESOLARAGB to mark yourself as a participant in this group buy. The discount will initially show up as $1.00. As more orders come in, the discount will be adjusted appropriately. If you pay with a credit card, your card will NOT be charged until the unit is shipped. Additionally, if you place an order and the group buy does not succeed, you will have the option of proceeding with your purchase at theRPMstore pricing or cancelling your order.
Shipping time will depend upon the number of orders received. If we get a huge response, it could take up to 5 weeks for all of the pipes to be manufactured and coated, all of the kits assembled, etc. I'll be keeping CP-E updated on the progress so that they can get things started even as the group buy is in progress.
ORDERS SO FAR: 1
Looking around the forums, I've found several threads about the CP-E product. One of the most informative threads is this one:
http://www.solaraguy.org/viewtopic.php?t=21689
I'd recommend checking it out. I'll also do a quick summary of the product here as well.
The CP-E MAFci system is not just another intake. It's an intake packaged with a fuel management controller that is pre-tuned for your vehicle. What this means is that you not only get the advantages of a huge 3.5" intake pipe without triggering any CELs, but you also get the advantages of a properly tuned vehicle. Creating a similar setup on your own would be entirely possible, but finding someone to install and tune your fuel management system properly on a dyno could take some effort, and by the time you bought all of the parts and paid for the tuning, you could easily spend twice as much money. This product was purposely designed to be installed by you, in your garage in about an hour and a half to two hours. And when you're done, you get the power instantly. No more tweaking or tuning needs to be done.
So, the question is... If you could spend less than $500 and then with only 1.5 to 2 hours of installation time gain an average of 14.7 wheel hp and 15.4 wheel ft lbs (with peak gains of 17.5 wheel hp and 20.1 wheel ft lbs), would you do it? Well, it's time to find out...
MSRP: $489 + $8 shipping = $497
theRPMstore's price: $469.95 + FREE shipping
GROUP BUY PRICING
This group buy will run from February 16, 2006 through March 3, 2006.
5+ units (including Gen 2 units): $459.95 + FREE shipping
10+ units (including Gen 2 units): $449.95 + FREE shipping
5+ units (Gen 1 and Gen 1.5 only): $449.95 + FREE shipping
10+ units (Gen 1 and Gen 1.5 only): $429.95 + FREE shipping
I hope that is clear. The Gen 2 unit is completely different, so it can't be included for the large discounts. However, I did want to provide some benefit to you guys for the Gen 2 orders. Essentially, you'll get the greatest discount for purchases of the Gen 1 and Gen 1.5 systems, but if the Gen 2 guys buy a lot, you could benefit from that as well.
HOW TO ORDER
Use one of these links, depending on which generation vehicle you have:
Order CP-E MAFci for Gen 1 Solara
Order CP-E MAFci for Gen 1.5 Solara
When you check out, use the coupon code CPESOLARAGB to mark yourself as a participant in this group buy. The discount will initially show up as $1.00. As more orders come in, the discount will be adjusted appropriately. If you pay with a credit card, your card will NOT be charged until the unit is shipped. Additionally, if you place an order and the group buy does not succeed, you will have the option of proceeding with your purchase at theRPMstore pricing or cancelling your order.
Shipping time will depend upon the number of orders received. If we get a huge response, it could take up to 5 weeks for all of the pipes to be manufactured and coated, all of the kits assembled, etc. I'll be keeping CP-E updated on the progress so that they can get things started even as the group buy is in progress.
ORDERS SO FAR: 1
Last edited by RPM on Fri Feb 17, 2006 11:42 am, edited 1 time in total.
www.theRPMstore.com
Your source for the CPE MAFci™ System! We also carry Xtec and Apexcone HID Kits that feature a LIFETIME warranty on all parts! More to come! Stay tuned!
Your source for the CPE MAFci™ System! We also carry Xtec and Apexcone HID Kits that feature a LIFETIME warranty on all parts! More to come! Stay tuned!
- RPM
- Just Licensed SolaraGuy
- Posts: 49
- Joined: Sun Jan 29, 2006 12:49 am
- Location: Fort Worth, Texas
