For Sale: V6 Injen SRI w/ Heatshield, Gen 1 Tail Lights

by **Ford_Fixorrepairdaily** » Sat Nov 24, 2007 2:18 pm

Hey everyone,

Up for sale are:

V6 Injen SRI with Injen Heatshield, filter hose and clamps. Only missing 2 screws( for MAF )you can find at your local hardware store. Filter is kinda dirty. SOLD!

Gen 1 Tail lights with 12 l.e.d. Turn Signals. Makes your turn signals into hiper blinkers! There's some grey specs of paint on the tail lights, as pictured. I'm pretty sure you can get it off with some goo gone. $80 Shipped.

Located in Southern California, San Gabriel Valley Area.

by **JMSinMaryland** » Sat Nov 24, 2007 2:24 pm

$100 shipped Im interested

by **DrLove** » Sun Nov 25, 2007 6:32 pm

Does all the lights for the taillights are with LEDs? or just the turn signal??

by **Ford_Fixorrepairdaily** » Sun Nov 25, 2007 7:50 pm

Just (2) l.e.d. turn Signal bulbs are included.

by **JMSinMaryland** » Mon Dec 03, 2007 5:28 pm

Received, any suggestions for cleaning filter? I have a K&N cleaning kit, wonder if I can use that? Do I need to oil the Injen filter?? Also besides the screws for the MAF am I missing anything else? I received 1 hose, but doesn't it need a second one for the other nipple?

by **CamryOnBronze** » Mon Dec 03, 2007 5:37 pm

^you can probably reuse the oem hoses for the intake- I reused two of the stock ones on my Injen install. I have used K&N cleaner and oil on other brands of air filters before, so i wouldnt see that being an issue either.

by **unbalancedwood** » Mon Dec 03, 2007 5:38 pm

^ Jon, you should be able to use the smaller hose for the smaller 'nipple' & for cleaning the injen is the same as cleaning the K&N.

wash off w/ water -> dry -> spray cleaner -> let soak for 10mins -> wash -> dry -> spray oil

PS, HURRAY for no stock airbox w/ your S/C!

by **Dawgz** » Mon Dec 03, 2007 6:07 pm

JMSinMaryland wrote:Received, any suggestions for cleaning filter? I have a K&N cleaning kit, wonder if I can use that? Do I need to oil the Injen filter?? Also besides the screws for the MAF am I missing anything else? I received 1 hose, but doesn't it need a second one for the other nipple?

If u have to ask, u have no business cleaning it.

by **Ruski** » Mon Dec 03, 2007 6:36 pm

^^ dawgs you cant say that. you asked how to remove the pillar to install your gauges

( J/P )

by **unbalancedwood** » Mon Dec 03, 2007 6:39 pm

OWNED! lol.

by **Dawgz** » Mon Dec 03, 2007 7:36 pm

Ruskimafia wrote:^^ dawgs you cant say that. you asked how to remove the pillar to install your gauges ( J/P )

I can definitly say that, considering this is what msg he left me when i asked about oils...

and my statement wasnt serious, it was something he had said to me, something really stupid. If u dont know how to do crap, leave it to someone else? then how the screw does anyone learn?

JMSinMaryland wrote:
Dawgz wrote:I have never done an oil change MYSELF on my car

and how much of it?

If you have to ask you have no business changing your own oil.

and yes, i do keep grudges, if u give me crap, ill find a way to give u crap too, today, tomorrow, later in the future, but u will get it.

by **unbalancedwood** » Mon Dec 03, 2007 7:43 pm

DOUBLY OWNED!!!

I feel like a commentator...maybe new career route :angel:

by **Ruski** » Mon Dec 03, 2007 7:56 pm

Dawgz wrote:
Ruskimafia wrote:^^ dawgs you cant say that. you asked how to remove the pillar to install your gauges ( J/P )

I can definitly say that, considering this is what msg he left me when i asked about oils...

and my statement wasnt serious, it was something he had said to me, something really stupid. If u dont know how to do crap, leave it to someone else? then how the screw does anyone learn?

JMSinMaryland wrote:
Dawgz wrote:I have never done an oil change MYSELF on my car

and how much of it?

If you have to ask you have no business changing your own oil.

and yes, i do keep grudges, if u give me crap, ill find a way to give u crap too, today, tomorrow, later in the future, but u will get it.

Dawgz i was just messing with you

by **woa_its_j3ff** » Mon Dec 03, 2007 9:37 pm

Dawgz wrote:
Ruskimafia wrote:^^ dawgs you cant say that. you asked how to remove the pillar to install your gauges ( J/P )

I can definitly say that, considering this is what msg he left me when i asked about oils...

and my statement wasnt serious, it was something he had said to me, something really stupid. If u dont know how to do crap, leave it to someone else? then how the screw does anyone learn?

JMSinMaryland wrote:
Dawgz wrote:I have never done an oil change MYSELF on my car

and how much of it?

If you have to ask you have no business changing your own oil.

and yes, i do keep grudges, if u give me crap, ill find a way to give u crap too, today, tomorrow, later in the future, but u will get it.

lol.

by **Ford_Fixorrepairdaily** » Thu Dec 06, 2007 1:47 am

Jon you should be able to reuse the oem hose for the smaller nipple. Nothing else is needed.

You should be able to clean them with the kit.

For Sale: V6 Injen SRI w/ Heatshield, Gen 1 Tail Lights

For Sale: V6 Injen SRI w/ Heatshield, Gen 1 Tail Lights

Dibs

Thanks

Re: Thanks

Who is online