The Greek Partout!! EVERYTHING is going!
by GreeKAvaLoN » Wed Jul 13, 2011 3:30 pm
So, some know, some don't, I bought a new car and I'm keeping the avalon on the side for now but no need to keep it modded since my new car (2002 6spd Maxima) is pretty much faster then a s/ced manual 1mz stock.. I'm still gonna be part of the boards of course but my avalon will be on the side as a safety car if anyone's breaks or anything. So, EVERYTHING is going. EVERYTHING.
I did not add shipping fees. I'm from Oak Lawn, IL and the zip is 60453 Local pickup is fine, and i'll drive to neighboring states. If anyone gets a shipping quote I'll honor it give or take a few $ (just to save us both time because I am busy once in a while) First come first serve, my paypal is greeksoccerboy@att.net
pics will be up tonight
Let's start with the big things.
3MZ Block (prepped by gabe himself) + gaskets to build (you only need stock 1mz heads + 1mz intake/ s/c) - 1000
2MZ w/ 50-60k mi currently setup to run in a gen4 w/ no problems, you could drop this motor in as a replacement or use cams and crank etc - 650
GLP Supra BBK (Brackets + Rotors, rotors have scrape from clips on the dual piston calipers) - 160 w/out calipers - 250 w/ dual piston calipers (if you send me stock ones these r ready to bolt on, i already did the grinding and etc)
Tein s-tech springs - 125
Poly DogBone (originally for manuals/gen3's but i will include the mounting brackets to bolt onto a gen4 auto or manual, stiff!) - 65
Jim's Torque rod - 45
3rd Gen Fuel Rails - 50
Jim's Fuel Mod - 125
Magnecore Wires - 60
JPP Headers (willing to seperate headers and y-pipe, good if u wanna build a turbo kit
) - 450
Greddy EVO2 - 200
TRD RSB - 160
K/N Filter (cleaned and good to go) - 40
1MZ Front Valve Cover - 25
Stock 1MZ Cat - 25
Stock 1MZ Exh Manis - 60
SOLARA 1MZ Starter (low miles, off the red knight, solara and avalon starters have the clips on different sides! idk about camrys) - 70
1MZ Alternator (should work, it's used and i'll take it to autozone to have them check it) - 50
Solara control arms (lighter then avalon's and i believe camrys, good if you want to switch to poly bushings, currently stock ones) - 45
Gen 3 1MZ Lower intake mani (good to port/polish the air assist vacuum line to injectors is blocked off on gen3s so you can use supra injectors and port/polish this) - 65
Gen 3 1MZ Airbox + MAF - 50
Stock 2MZ Exh Mani - 80 (they're shorter so possibly easier to build a turbo off of)
Sock 2MZ Intake Mani ( EGR Blocked off from factory i'll also include the EGR cooler block off plate that's oem, so just block off exhaust) - 125
I did not add shipping fees. I'm from Oak Lawn, IL and the zip is 60453 Local pickup is fine, and i'll drive to neighboring states. If anyone gets a shipping quote I'll honor it give or take a few $ (just to save us both time because I am busy once in a while) First come first serve, my paypal is greeksoccerboy@att.net
pics will be up tonight
Let's start with the big things.
3MZ Block (prepped by gabe himself) + gaskets to build (you only need stock 1mz heads + 1mz intake/ s/c) - 1000
2MZ w/ 50-60k mi currently setup to run in a gen4 w/ no problems, you could drop this motor in as a replacement or use cams and crank etc - 650
GLP Supra BBK (Brackets + Rotors, rotors have scrape from clips on the dual piston calipers) - 160 w/out calipers - 250 w/ dual piston calipers (if you send me stock ones these r ready to bolt on, i already did the grinding and etc)
Tein s-tech springs - 125
Poly DogBone (originally for manuals/gen3's but i will include the mounting brackets to bolt onto a gen4 auto or manual, stiff!) - 65
Jim's Torque rod - 45
3rd Gen Fuel Rails - 50
Jim's Fuel Mod - 125
Magnecore Wires - 60
JPP Headers (willing to seperate headers and y-pipe, good if u wanna build a turbo kit
) - 450Greddy EVO2 - 200
TRD RSB - 160
K/N Filter (cleaned and good to go) - 40
1MZ Front Valve Cover - 25
Stock 1MZ Cat - 25
Stock 1MZ Exh Manis - 60
SOLARA 1MZ Starter (low miles, off the red knight, solara and avalon starters have the clips on different sides! idk about camrys) - 70
1MZ Alternator (should work, it's used and i'll take it to autozone to have them check it) - 50
Solara control arms (lighter then avalon's and i believe camrys, good if you want to switch to poly bushings, currently stock ones) - 45
Gen 3 1MZ Lower intake mani (good to port/polish the air assist vacuum line to injectors is blocked off on gen3s so you can use supra injectors and port/polish this) - 65
Gen 3 1MZ Airbox + MAF - 50
Stock 2MZ Exh Mani - 80 (they're shorter so possibly easier to build a turbo off of)
Sock 2MZ Intake Mani ( EGR Blocked off from factory i'll also include the EGR cooler block off plate that's oem, so just block off exhaust) - 125
Last edited by GreeKAvaLoN on Mon Jul 18, 2011 3:07 pm, edited 2 times in total.
are avalons supposed to be this fast?
-
GreeKAvaLoN - SolaraGuy Driver
- Posts: 745
- Joined: Sun Mar 09, 2008 10:34 am
- Location: Chicagoo
